Jenn-Air W10208727A installation instructions Complete Installation

6 Check side attachment

plastic button

If securing with a side attachment, check that sides of door do not rub against the screw heads. If they do, dishwasher must be re-centered. When dishwasher is properly centered, replace plastic buttons.

7 Remove towel and replace lower dishwasher rack

Remove towel from dishwasher. Reinstall the lower dish rack.

If needed, see website for animated representation of this step. Visit www.jenn-air.com/anchoringunder FAQ tab.

Complete Installation

1 Reinstall access panels

Insulation

(on some models)

Access panel

Insulation

Check that grounding clip is attached to the lower panel. Position the lower panel behind the access panel. On some models there is insulation on the access panel which must fall behind the insulation on the lower panel.

2 Reinstall access panels

Hold the two panels together and place them against dishwasher leg. Using a Phillips or 1/4” screwdriver, reinstall the screws through the holes in the access panel and the slots in the lower panel.

3 Check lower panel edge

Check that the lower edge of the lower panel contacts the floor. Adjust if necessary.

4 Tighten screws

Lower

panel

Grounding clip

Tighten access panel screws.

23