AEG D8800-4 Care and Cleaning, Cleaning Materials, Cleaning the Outside of the Appliance

Page 35

CARE AND CLEANING

Before cleaning always allow the cooling fan to cool the appliance down before switching off at the electricity supply.

CLEANING MATERIALS

Before using any cleaning materials on your appliance, check that they are suitable and that their use is recommended by the manufacturer.

Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives and scourers should also be avoided as damage will occur.

CLEANING THE OUTSIDE OF THE APPLIANCE

Do not use abrasive cleaning materials e.g. Hob Brite, Brillo pads or scourers on painted or printed finishes as damage may occur.

Regularly wipe over the control panel, doors and handles using a soft cloth and hot soapy water. To prevent streaking finish with a soft cloth.

Stainless Steel cream cleaners are abrasive and should be avoided as they may dull the surface finish. Any spillage on the stainless steel finish must be wiped off immediately.

Do not attempt to remove any of the control knobs from the panel as this may cause damage and is a safety hazard.

Under no circumstances should the door assembly be detached from the product for cleaning.

REMOVING AND REPLACING WIREWORK RUNNERS

Remove all shelves and furniture from the oven.

Hold the wirework at the bottom, unclip from the cavity side and gently pull towards the centre of the oven.

Unhook the runner at the top and remove from the cavity.

To replace the runners, hook the wirework side runner into the cavity, slide back and press into place.

Ensure the wirework runners are firmly in position before replacing the oven shelves.

SIDE PANEL

CAVITY

CENTRE

35

Image 35

Contents Competence D8800-4 Important Safety Information Contents BUILT-IN Electric Multifunction Double Oven Description of the ApplianceControl Panel Getting to Know Your ApplianceGrill and Oven Furniture Telescopic Runners Where FittedBefore Using the Appliance KEY Electronic TimerHOW to SET the Time of DAY HOW to SET the CountdownTo SET the Timer to Switch on OFF Automatically To Cancel the CountdownSetting the Oven Timer Control Things to Note To SET the Timer to Switch OFF onlyTo Cancel AN Automatic Programme To Return the Appliance to ManualResidual Heat Child Safety DeviceOven Safety CUT-OUT Other FunctionsSecond Oven Full Width Dual Grill Using Full Width Dual GrillEnsure the handles are positively located Grill PAN and HandlesHints and Tips Food Shelf Grill Time Grilling ChartSecond Oven Conventional Cooking Using Second Oven Conventional CookingTo FIT the Second Oven Shelf Second Oven Food Shelf Cooking Approx Position Tempc Second Oven Cooking ChartSecond Oven Base Heat Finishing Using Base Heat FinishingSecond Oven Keep Warm Using Keep WarmMain Oven Full Width Dual Grill Using Main Oven Full Width Dual GrillHints and Tips Ventitherm Precision FAN Cooking Using Ventitherm Precision FAN CookingTo FIT the Main Oven Shelves Using the Telescopic RunnersWhere fitted HOT AIR FAN Baking Using HOT AIR FAN BakingConventional Cooking Using Conventional CookingHints and Tips FAN Oven Conventional Oven Main Oven Cooking ChartMeat Temperature Cooking Time Roasting ChartCooking Times Using Rotitherm RoastingRotitherm Roasting Food Shelf Temp Rotitherm Roasting ChartPizza Using PizzaFAN Controlled Defrosting Using FAN Controlled DefrostingMain Oven Keep Warm Selecting Speedcook Using SpeedcookSpeedcook Removing and Replacing Wirework Runners Care and CleaningCleaning Materials Cleaning the Outside of the ApplianceAerosol cleaners must not be used on Stayclean surfaces Cleaning Inside the OvensTo Remove the Inner Glass Cleaning the Door GlassTo Clean the Inner Glass Door Panels Replacing AN Oven Light Bulb Cleaning the Grill and Oven FurnitureTo Replace the Inner Glass Panel Something not Working Grill, ovens and timer do not workService and Spare Parts Standard guarantee conditions Guarantee ConditionsTechnical Details Do not lift the appliance by the handles Installation InstructionsPreparing Cabinet for Fitting of Oven Choice of Electrical ConnectionBuilt In Installation Recommended Cabinet Dimensions in MillimetresTo Remove Cover of Mains Terminal HOW to Finish UnpackingChecking Electrical Connections Connecting to the Mains TerminalConnecting to a HOB or Cooker Point Fitting Into the Cabinet Page Page Page AEG