•To deactivate this function, touch 
. The display shows the heat setting that you set before.
When the Stop and Go function operates, you cannot change the heat settings.
LOCK
When the cooking zones operate, you can lock the control panel but not 
. It prevents an accidental change of the heat setting.
This function does not deactivate the timer function.
1.Set the heat setting.
2.To activate this function, touch 
. The display shows the symbol 
for 4 seconds.
3.To deactivate this function, touch
. The display shows the heat set- ting that you set before.
When you deactivate the appli- ance, the function is deactiva- ted.
When you activate the appliance, the display shows SAFE .
The locking/unlocking function locks or unlocks the oven inter- face at the same time.
CHILD SAFETY DEVICE
This function prevents an accidental op- eration of the hob.
Activating the child safety device
1.Touch 
to activate the hob. Do not set the heat settings.
2.Touch 
for 4 seconds. The dis- play shows the symbol 
. The child safety device operates.
3.Touch 
to deactivate the hob. Deactivating the child safety device
1.Touch 
to activate the hob. Do not set the heat settings.
2.Touch 
for 4 seconds. The dis- play shows the symbol 
.
3.Touch 
to deactivate the hob.
ENGLISH 13
Overriding the child safety device for one cooking session
1.Touch 
to activate the hob. The display shows the symbol 
.
2.Touch 
for 4 seconds.
3.Set the heat settings in less than 10 seconds. You can operate the hob.
4.When you deactivate the hob, the child safety device operates again.
The child safety device function locks the hob and oven at this same time.
RESIDUAL HEAT INDICATOR
The residual heat indicator comes on when a cooking zone is hot.
WARNING!
There is a risk of burns from re- sidual heat.
AUTOMATIC SWITCH-OFF
The hob deactivates automatically if:
•All cooking zones are deactivated.
•You do not set the heat setting after you activate the hob.
•You spill something or put something on the hob control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel.
•The hob becomes too hot (e.g. when a saucepan boils dry). Before you use the hob again, the cooking zone must be cool.
•You use incorrect cookware. The dis-
play shows the symbol 
and the cooking zone deactivates automati- cally after 2 minutes.
•You do not deactivate a cooking zone or change the heat setting. Af- ter some time (see the table), the dis-
play shows the symbol 
and the hob deactivates.
Heat setting | |
- | 6.0 h |
|
|