Sanyo STB1010C1, STB0823H1, STB0810C1, STB1020C1 Removing Blower Wheel, Removing Evaporator

(3) Lift the electrical heater up out of the unit. (Fig. 9)

(4) Remove the 4 screws holding the electric heater

and take off the evaporator’s casing plate. (Fig. 10)	Electric
	heater

Fig. 10

Fig. 9

9-5. Removing Blower Wheel

(1) Remove the electric heater.

Refer to “9-4. Removing Electric Heater.”

(2)Loosen the bolt holding the blower wheel on the motor shaft. (Fig. 11)

(3) Remove the blower wheel from the unit. (Fig. 12)

Blower wheel

Blower wheel

Fig. 11

Fig. 12

9-6. Removing Evaporator

(1)Remove the top cover plate and blade Ass´y. Refer to “9-4. 1) and 2) Removing Electric Heater.”

(2)Remove the screws holding the evaporator. (Fig. 13)

Fig. 13

39