Condenser casing
9-7. Removing Condenser
(1) Remove the screws holding the condenser casing. (Fig. 14)
Fig. 14
(2) Remove the screws holding the condenser. (Fig. 15)
(3) Hold the lower part of the condenser with both hands and tilt slightly, then lift up carefully to avoid distorting the copper tube.
Condenser
Fig. 15
9-8. Removing Propeller Fan
(1) Remove the condenser.
Refer to
(2) Loosen the bolt holding the propeller fan on the motor shaft. (Fig. 16)
Fig. 16
Condenser | Propeller fan |
(3)Remove the propeller fan from the motor shaft. (Fig. 17)
Fig. 17
40