Surface Cooking, cont.
Cooktop at a | Sealed Burners | ||
Glance | Thesealedburnersaresecuredtothecooktop | ||
|
| and are not designed to be removed. Since | |
| Model CGC2430 | the burners are sealed into the cooktop, | |
|
| boilovers or spills will not seep underneath | |
| 1 | the cooktop. | |
| 2 | However, the burners should be cleaned af- | |
| 3 | ||
| ter each use. The head portion of the burner | ||
| 4 | ||
| has a removable cap that is easily removed | ||
|
| ||
1. | Left rear burner (9,200 BTUs). | for cleaning. (See page 6 for cleaning direc- | |
tions.) | |||
2. | Right rear burner (9,200 BTUs). | Burner caps must be correctly placed on the | |
3. | Left front burner (9,200 BTUs). | ||
burnerbaseforproperoperationoftheburner. | |||
4. | Right front burner (12,500 BTUs). | ||
|
can be used to quickly bring water to a boil and for
*BTU ratings will vary when using LP gas.
Burner Grates
The grates must be properly positioned be- fore cooking. Improper installation of the gratesmayresultinchippingofthecooktop.
Do not operate the burners without a pan on the grate. The grate’s porcelain finish may chip without a pan to absorb the heat from the burner flame.
Model CGC2536
1 2 3 4 5
High
Performance
Burner*
There is one high speed burner on your cooktop, located in the right front position. This burner offers higher speed cooking that
Although the burner grates are durable, they will gradually lose their shine and/or discolor, due to the high temperatures of the gas flame.
1.Left front burner (9,200 BTUs).
2.Left rear burner (10,500 BTUs).
3.Center burner (9,200 BTUs).
4.Right rear burner (9,200 BTUs).
5.Right front burner (12,500 BTUs).
To prevent the cooktop from discoloring or staining:
•Clean cooktop after each use.
•Wipe acidic or sugary spills as soon as the cooktop has cooled as these spills may discolor the surface.
NOTES:
•A properly adjusted burner with clean ports will light within a few seconds. If using natural gas, the flame will be blue with a deeper blue inner cone.
If the burner flame is yellow or is noisy, the air/gas mixture may be incorrect. Contact a service technician to adjust. (Adjustments are not covered by the warranty.)
With LP gas, some yellow tips on the flames are acceptable. This is normal and adjustment is not necessary.
•With some types of gas, you may hear a “popping” sound when the surface burner is turned off. This is a normal operating sound of the burner.
•To improve cooking efficiency and to prevent possible damage to the cooktop or pan, the flame must be adjusted so it does not extend beyond the edge of the pan.
5