Extron electronic USP 507 manual Mounting the USP, Tabletop placement, Rack mounting

Page 15

Mounting the USP 507

If the USP 507 is to be rack mounted, it is important to mount it before cabling it. Four rubber feet are included with the unit. Install the feet only if the unit is to be mounted on a tabletop (see “Tabletop placement” below).

Tabletop placement

For tabletop placement, install the self-adhesive rubber feet/pads (provided) onto the four corners of the bottom of the device.

UL guidelines for rack mounted devices

The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the USP 507 in a rack.

1. Elevated operating ambient temperature — If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, install the device in an environment compatible with the maximum ambient temperature (Tma = +122 °F, +50 °C) specified by Extron.

2. Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe operation of the equipment is not compromised.

3. Mechanical loading — Mount the equipment in the rack so that a hazardous condition is not achieved due to uneven mechanical loading.

4. Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

5. Reliable earthing (grounding) — Maintain reliable grounding of rack- mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (such as use of power strips).

Rack mounting

To rack mount the USP 507, insert screws under each opposite corner of the unit and secure it to the rack (see figure 2-1).

Rack Mount

Bracket

Figure 2-1 — Mounting the USP 507

USP 507 • Installation

2-3

Page 14 Page 16
Image 15
Page 14 Page 16
Contents USP Universal Signal ProcessorSicherheitsanleitungen Deutsch PrecautionsSafety Instructions English Consignes de Sécurité FrançaisFCC Class a Notice Table of Contents Table of Contents, cont’d USP 507 Table of Contents Iii Installing and Starting the Signal ProcessingIv USP 507 Table of Contents One USP 507 Introduction IntroductionAbout this Manual About the USPDefinitions Introduction, cont’d FeaturesUSP 507 Introduction Two USP 507 Installation Installationstallation, cont’dUL/Safety Requirements Important safety instructionsRack mounting Tabletop placementMounting the USP UL guidelines for rack mounted devicesInstallation, cont’d Rear Panel Features and ConnectionsPower and video input connections Output, user interface, and control connections Installation and cabling Powering Up Resetting the Unit with the Reset ButtonDefault display cycle Mode Activation Result Purpose/Notes USP 507 Reset Mode SummaryThree Picture control buttons These six buttons are Front Panel OperationFront Panel Overview Special function buttons These four buttons areSwitching Inputs Special Function Button OperationButton Backlighting FrontPanelOperation,co t’d USP 507 Menu SystemOverview of menus Next USP 507 Front Panel OperationRecall a user preset Using the menusUser presets Save a user presetSettings for each signal format Input configurationPress Next or Menu to return to the Output Configuration Output configurationImage capture/recall To capture an imageTo recall an image To remove an image from the display Advanced configurationAdjust knob to turn the Auto Memory on or off. See -6 for View comm settings Edit comm settingsExit menu Setting the Front Panel Locks Executive Modes Scan converter configurationEnabling or disabling Executive mode 1 from the front panel USP 507 connected to a matrix switcher Setting Up the USP 507 to Work with a Matrix SwitcherUSP 507 Input #3 select the matrix Connection must be via IP not RS-232Extron USP RS-232 cable onlyFour SIS Programmer’s Guide RS-232/RS-422 LinkEthernet LAN\⤀ Port Processor-Initiated Messages Connection timeoutsUsing verbose mode Host-to-Processor InstructionsProcessor Error Responses Using the Command/Response Table for SIS CommandsSIS Programmer’s Guide, cont’d = Secam Symbol definitionsSIS Programmer’s Guide, cont’d $HSRT Command Response Table for SIS CommandsCommand Ascii command Response Additional description Input Switching and ConfigurationXalin XphasTpix ApixX1%BRIT X1% ColrX1%TINT X1%CONTX1HPAN X1& HsizX1&VSIZ X1* ZoomX7VSTD X2#OPOLX2$OSYN X7%VTPOESX7&VDET ESX1&HSIZESX1&VSIZ ESX7&HDETFront panel lockout executive mode\⤀ Advanced ConfigurationsX2TEST X3&VDLYPIP X5TIMEPicture in Picture Resets Information requestImage capture/recall to USP 507 flash memory Using the Command/Response Table for IP SIS Commands Command/Response Table for IP SIS Commands EAE WX12#CVECV EFFEthernet data port WX12%CD~CJ ECJELF Programmer’sGuide, cont’d EDFFive USP 507 USP 507 Software Installing the programUSP 507 Software Starting the programOrientation Using the ProgramOptions menu USP 507 Software, cont’dControl program menus File menuTools menu Download Now USP 507 USP 507 Software Sppcp Help file’s main window Help menuControl tab screen Control tabI/O Configuration tab screen Configuration tabAdvanced Features Within this section Advanced Settings tabScan Converter tab screen Scan Converter tabStatus bar Image Capture tabSix USP 507 Html Operation Accessing the Web PagesHtml Operation Start the Web browser programSystem Status System StatusHtml Operation, cont’d Configuration PagesSystem Settings IP Settings fieldsSubnet Mask field Dhcp radio buttonsIP Address field Gateway IP Address fieldDate/Time Settings fields Date/Time Settings fieldsScaler settings Scaler SettingsRGB delay, test pattern, and Edid selections Passwords PasswordsDownload product namefirmware version.exe button Firmware UpgradeChoose file window with a firmware file selected File ManagementDelete all files Click Delete All Uploading filesAdding a directory Other file management activitiesUser Control Control PagesPIP Setup/PIP Presets Memory/Input PresetsImage is not yet displayed ImagesAAppendix a Reference InformationSpecifications Reference InformationUSP 507 Reference Information Sync Mtbf Reference Information, cont’dOptional I/O boards Part Numbers and AccessoriesAccessories Included partsAppendixBB Ping to determine Extron IP address Default addressEthernet Connection Ethernet LinkConnect as a Telnet client Ping to determine Web IP addressUSP 507 Ethernet Connection Escape character and Esc key Connecting to the USP 507 Open command\⤀Ethernet Connection, cont’d Telnet tipsIP addresses and octets Subnetting a PrimerGateways Local and remote devicesMasked octets are not compared indicated by X in figure B-6 Subnet masks and octetsDetermining whether devices are on the same subnet Unmasked octets are compared indicated by ? in figure B-6USA, Canada, South America Japan Central America Europe, Africa, and the Middle East ChinaAsia Middle East

USP 507 specifications

Extron Electronics has long been a leader in the field of professional AV system design, and one of their standout products is the USP 507. The USP 507 is an advanced universal speaker processor that is engineered to elevate audio performance across a variety of applications. Designed for both commercial and residential environments, the USP 507 combines cutting-edge technology with user-friendly features to deliver superior sound quality and precise audio control.

One of the main features of the USP 507 is its comprehensive signal processing capabilities. The device supports a range of audio formats and delivers 48 kHz or 96 kHz sample rates, ensuring high fidelity in audio reproduction. It also includes a configurable 5-band equalizer per channel, allowing users to fine-tune audio output to accommodate different room acoustics and speaker types.

The USP 507 is equipped with Extron’s patented SpeedMatch technology to enhance speaker performance and optimize audio clarity. This innovative technology automatically analyzes the audio signals and adjusts various parameters to compensate for environmental conditions, ensuring consistent sound quality across all outputs.

In terms of connectivity, the USP 507 offers a wide array of input and output options. It includes both balanced and unbalanced audio inputs to facilitate seamless integration with other audio equipment. Furthermore, the device provides multiple output zones, enabling simultaneous audio distribution to different areas within a facility.

The USP 507 features intuitive software for simplified setup and operation. The Extron Toolbelt application allows users to configure, manage, and monitor the speaker processor through an easy-to-navigate interface. This software enhances user experience by providing real-time diagnostics and seamless integration with other Extron devices.

Durability and reliability are also hallmarks of the USP 507. Built with high-quality materials, it is designed to withstand the demands of professional use while ensuring long-lasting performance. Additionally, the device comes equipped with advanced thermal management features to prevent overheating during extended operations.

In summary, the Extron USP 507 is a versatile universal speaker processor that combines advanced signal processing technologies, a user-friendly interface, and robust construction. Its ability to deliver superior audio performance makes it an ideal choice for various applications, ranging from corporate environments to high-end residential setups. With its comprehensive features and reliable performance, the USP 507 stands out as an essential tool for audio professionals seeking to enhance their sound experience.
Top Page Image Contents