Extron electronic USP 507 manual Pip, X5TIME, Picture in Picture

SIS Programmer’s Guide, cont’d

Command	ASCII command	Response	Additional description
	(host to processor\⤀	(processor to host\⤀
Picture in Picture
PIP on/off
PIP input select	E X!PIP}	PipX!]	Turn PIP on and display input
			X!.
PIP off	E0PIP}	Pip0]	Turn PIP off.
View PIP status	EPIP}	X! ]	View PIP window selection.

NWhen PIP is enabled, all picture control commands apply to the image in the PIP window.

Swap PIP

Swap	%	Tke]	Swap content between main
			and PIP window.
On-screen clock
Enable on-screen clock	E X5^TIME}	TimeX5^]	Display the time on the video
			output.
View settings	ETIME}	X5^]	View setting.

On-screen clock horizontal position

Specific value	E K X1^HCTR}	HctrKX1^]
Increment up	EK +HCTR}	HctrKX1^]
Increment down	EK -HCTR}	HctrKX1^]
View settings	EK HCTR}	X1^]

Set horizontal position to X1^. Shift clock right.

Shift clock left.

Horizontal position is X1^.

On-screen clock vertical position

Specific value	E K X1^VCTR}	VctrKX1^]
Increment up	EK +VCTR}	VctrKX1^]
Increment down	EK -VCTR}	VctrKX1^]
View settings	EK VCTR}	X1^]

Set vertical centering to X1^. Shift clock down.

Shift clock up.

Vertical position value is X1^.

N X! = Input selection	1 – 7
X1^ = H and V position	zero location is 2048, and limits are ± the output resolution
X5^ = On-screen clock	0 = disabled (default), 1 = date and time, 2 = time only, 3 = date only.

4-14 USP 507 • SIS Programmer’s Guide