Extron electronic USP 507 Dhcp radio buttons, Gateway IP Address field, Subnet Mask field

Page 74

DHCP radio buttons

The DHCP On radio button directs the device to ignore any entered IP addresses and to obtain its IP address from a Dynamic Host Configuration Protocol (DHCP) server (if the network is DHCP capable).

The DHCP Off radio button turns DHCP off. Contact the local system administrator to determine this control’s setting.

IP Address field

The IP address field contains the IP address of the USP 507. This value is encoded in the unit’s flash memory.

Valid IP addresses consist of four 1-, 2-, or 3-digit numeric subfields separated by dots (periods). Each field can be numbered from 000 through 255. Leading zeros, up to 3 digits total per field, are optional. Values of 256 and above are invalid.

The factory-installed default address is 192.168.254.254, but if this conflicts with other equipment at your installation, you can change the IP address to any valid value.

NIP address changes can cause conflicts with other equipment. Only local system administrators should change IP addresses.

Gateway IP Address field

The gateway IP address field identifies the address of the gateway to the mail server to be used if the device and the mail server are not on the same subnet.

The gateway IP address has the same validity rules as the system IP address.

Subnet Mask field

The Subnet Mask field is used to determine whether the USP 507 is on the same subnet as the mail server when you are subnetting. For more information, see “Subnetting — A Primer”, in Appendix B, “Ethernet Connection”.

MAC Address field

The Media Access Control (MAC) address is hard coded in the device and cannot pobe changed.

Firmware field

This field shows the firmware version number. This field changes only when the firmware is updated.

Model field

This field shows the model (USP 507) and cannot be changed.

Part Number field

This field shows the USP 507 part number (60-1055-xx) and cannot be changed.

USP 507 • HTML Operation

6-5

Page 73 Page 75
Image 74
Page 73 Page 75
Contents Universal Signal Processor USPConsignes de Sécurité Français PrecautionsSafety Instructions English Sicherheitsanleitungen DeutschFCC Class a Notice Table of Contents Table of Contents, cont’d Installing and Starting the Signal Processing USP 507 Table of Contents IiiIv USP 507 Table of Contents One About the USP IntroductionAbout this Manual USP 507 IntroductionDefinitions Features Introduction, cont’dUSP 507 Introduction Two Important safety instructions Installationstallation, cont’dUL/Safety Requirements USP 507 InstallationUL guidelines for rack mounted devices Tabletop placementMounting the USP Rack mountingPower and video input connections Installation, cont’dRear Panel Features and Connections Output, user interface, and control connections Installation and cabling Default display cycle Powering UpResetting the Unit with the Reset Button USP 507 Reset Mode Summary Mode Activation Result Purpose/NotesThree Special function buttons These four buttons are Front Panel OperationFront Panel Overview Picture control buttons These six buttons areButton Backlighting Switching InputsSpecial Function Button Operation Overview of menus FrontPanelOperation,co t’dUSP 507 Menu System USP 507 Front Panel Operation NextSave a user preset Using the menusUser presets Recall a user presetInput configuration Settings for each signal formatOutput configuration Press Next or Menu to return to the Output ConfigurationTo recall an image Image capture/recallTo capture an image Advanced configuration To remove an image from the displayAdjust knob to turn the Auto Memory on or off. See -6 for Exit menu View comm settingsEdit comm settings Enabling or disabling Executive mode 1 from the front panel Setting the Front Panel Locks Executive ModesScan converter configuration Setting Up the USP 507 to Work with a Matrix Switcher USP 507 connected to a matrix switcherConnection must be via IP not RS-232 USP 507 Input #3 select the matrixRS-232 cable only Extron USPFour Ethernet LAN\⤀ Port SIS Programmer’s GuideRS-232/RS-422 Link Host-to-Processor Instructions Connection timeoutsUsing verbose mode Processor-Initiated MessagesSIS Programmer’s Guide, cont’d Processor Error ResponsesUsing the Command/Response Table for SIS Commands Symbol definitions = SecamSIS Programmer’s Guide, cont’d Input Switching and Configuration Command Response Table for SIS CommandsCommand Ascii command Response Additional description $HSRTApix XphasTpix XalinX1%CONT X1% ColrX1%TINT X1%BRITX1* Zoom X1& HsizX1&VSIZ X1HPANX7%VTPO X2#OPOLX2$OSYN X7VSTDESX7&HDET ESX1&HSIZESX1&VSIZ ESX7&VDETX3&VDLY Advanced ConfigurationsX2TEST Front panel lockout executive mode\⤀Picture in Picture PIPX5TIME Image capture/recall to USP 507 flash memory ResetsInformation request Using the Command/Response Table for IP SIS Commands Command/Response Table for IP SIS Commands EFF WX12#CVECV EAEECJ WX12%CD~CJ Ethernet data portEDF Programmer’sGuide, cont’d ELFFive Starting the program Installing the programUSP 507 Software USP 507 USP 507 SoftwareUsing the Program OrientationFile menu USP 507 Software, cont’dControl program menus Options menuTools menu Download Now USP 507 USP 507 Software Help menu Sppcp Help file’s main windowControl tab Control tab screenConfiguration tab I/O Configuration tab screenAdvanced Settings tab Advanced Features Within this sectionScan Converter tab Scan Converter tab screenImage Capture tab Status barSix Start the Web browser program Accessing the Web PagesHtml Operation USP 507 Html OperationSystem Status System StatusIP Settings fields Configuration PagesSystem Settings Html Operation, cont’dGateway IP Address field Dhcp radio buttonsIP Address field Subnet Mask fieldDate/Time Settings fields Date/Time Settings fieldsScaler Settings Scaler settingsRGB delay, test pattern, and Edid selections Passwords PasswordsFirmware Upgrade Download product namefirmware version.exe buttonFile Management Choose file window with a firmware file selectedOther file management activities Uploading filesAdding a directory Delete all files Click Delete AllControl Pages User ControlMemory/Input Presets PIP Setup/PIP PresetsImages Image is not yet displayedReference Information AAppendix aUSP 507 Reference Information SpecificationsReference Information Sync Reference Information, cont’d MtbfIncluded parts Part Numbers and AccessoriesAccessories Optional I/O boardsAppendixBB Ethernet Link Default addressEthernet Connection Ping to determine Extron IP addressUSP 507 Ethernet Connection Connect as a Telnet clientPing to determine Web IP address Telnet tips Connecting to the USP 507 Open command\⤀Ethernet Connection, cont’d Escape character and Esc keyLocal and remote devices Subnetting a PrimerGateways IP addresses and octetsUnmasked octets are compared indicated by ? in figure B-6 Subnet masks and octetsDetermining whether devices are on the same subnet Masked octets are not compared indicated by X in figure B-6Asia Middle East USA, Canada, South America Japan Central AmericaEurope, Africa, and the Middle East China

USP 507 specifications

Extron Electronics has long been a leader in the field of professional AV system design, and one of their standout products is the USP 507. The USP 507 is an advanced universal speaker processor that is engineered to elevate audio performance across a variety of applications. Designed for both commercial and residential environments, the USP 507 combines cutting-edge technology with user-friendly features to deliver superior sound quality and precise audio control.

One of the main features of the USP 507 is its comprehensive signal processing capabilities. The device supports a range of audio formats and delivers 48 kHz or 96 kHz sample rates, ensuring high fidelity in audio reproduction. It also includes a configurable 5-band equalizer per channel, allowing users to fine-tune audio output to accommodate different room acoustics and speaker types.

The USP 507 is equipped with Extron’s patented SpeedMatch technology to enhance speaker performance and optimize audio clarity. This innovative technology automatically analyzes the audio signals and adjusts various parameters to compensate for environmental conditions, ensuring consistent sound quality across all outputs.

In terms of connectivity, the USP 507 offers a wide array of input and output options. It includes both balanced and unbalanced audio inputs to facilitate seamless integration with other audio equipment. Furthermore, the device provides multiple output zones, enabling simultaneous audio distribution to different areas within a facility.

The USP 507 features intuitive software for simplified setup and operation. The Extron Toolbelt application allows users to configure, manage, and monitor the speaker processor through an easy-to-navigate interface. This software enhances user experience by providing real-time diagnostics and seamless integration with other Extron devices.

Durability and reliability are also hallmarks of the USP 507. Built with high-quality materials, it is designed to withstand the demands of professional use while ensuring long-lasting performance. Additionally, the device comes equipped with advanced thermal management features to prevent overheating during extended operations.

In summary, the Extron USP 507 is a versatile universal speaker processor that combines advanced signal processing technologies, a user-friendly interface, and robust construction. Its ability to deliver superior audio performance makes it an ideal choice for various applications, ranging from corporate environments to high-end residential setups. With its comprehensive features and reliable performance, the USP 507 stands out as an essential tool for audio professionals seeking to enhance their sound experience.
Top Page Image Contents