How to fill rinse aid | en |
Rinse aid
This product makes dishes sparkle and helps them to dry without spotting. The dispenser is located on the inside panel of the door .
When the low rinse aid indicator “1 ” is bright ,it means the rinse aid is low,you must load rinse aid .
1
Low
Full
Loading the rinse aid |
|
Regardless of the type of detergent dispenser installed on |
|
your appliance, you must proceed as indicated below when |
|
loading the rinse aid. | 2 3 |
To open the dispenser, turn the "2" cap in an |
|
direction and then pour in the rinse aid, making sure not to |
|
overfill. The amount of rinse aid used for each cycle can be |
|
regulated by turning the " 3" dose adjustor, located beneath |
|
the "2" cap, with a screwdriver. There are 6 different settings; |
|
the normal dosage setting is 3. |
|
Important
Proper dosage of the rinse aid improves drying.
If drops of water remain on the dishes or spotting occurs, the dosage adjus- tor should be turned to a higher setting.
If the dishes have white streaks, turn the dosage adjustor to a lower setting.
10