Manitowoc Ice RF manual Air-Cooled Condenser Cleaning, Arctic Pure Water Filter System

Page 22

Section 4

Maintenance

 

 

ICE CHUTE REMOVAL

RFS0300/RFS0650/RF1200/RF2300 Only

1.Place the toggle switch in the OFF position, turn off the water supply and disconnect electrical power to the ice machine.

2.Disconnect water supply.

3.Remove water reservoir cover.

4.Remove bin thermostat from ice chute.

5.Loosen bolts holding cross member.

6.Lift cross member and remove ice chute.

LOOSEN

TIP TOP OF ICE

SUPPORT BOLTS

CHUTE BACK AND

 

LIFT TO REMOVE

ICE CHUTE SWITCH ACTUATOR REMOVAL

RFS0300/RFS0650/RF1200/RF2300 Only

1.Pull to remove nylon end cap.

2.Slide pin to remove.

3.Remove both sections of the pressure switch bracket.

INCORRECT REASSEMBLY CAN

RESULT IN AN ICE MACHINE

THAT WILL NOT RUN

Air-Cooled Condenser Cleaning

!Warning

Disconnect electric power to the ice machine and the remote condenser at the electric service switch before cleaning the condenser.

A dirty condenser restricts airflow, resulting in excessively high operating temperatures and reduced ice production. Clean the condenser at least every six months.

!Caution

The condenser fins are sharp. Use care when cleaning them.

1.Clean the outside of the condenser with a soft brush or a vacuum with a brush attachment. Shine a flashlight through the condenser to check for dirt between the fins. If dirt remains, a method suitable to remove the contamination must be used to ensure air flow.

2.RFS0300/RFS0650/RF1200/RF2300 Only. Clean the washable filter with a mild soap and water solution.

Arctic Pure Water Filter System

Engineered specifically for Manitowoc ice machines. This water filter is an efficient, dependable, and affordable method of inhibiting scale formation, filtering sediment, and removing chlorine taste and odor.

Manitowoc Cleaner and Sanitizer

Manitowoc Ice Machine Nickel Safe Cleaner is available in convenient 16 oz. (473 ml) bottles. Manitowoc Ice Machine Sanitizer is available in 16 oz. (473 ml) and

1 gal (3.78 L) bottles.

Cleaner Part Number

Sanitizer Part Number

16 oz.

000000084

16 oz.

94-0565-3

 

 

1 Gallon

94-0581-3

Image 22
Contents Manitowoc This manual contains English and French textTable of Contents Table of Contents Section Maintenance Section Customer SupportTable of Contents Section General Information RF2300 Bin Adapter InstallationModel Numbers Location of Ice Machine Section Installation InstructionsInstallation Requirements Ice Machine Heat of RejectionWater Supply and Drain Line SIZING/ Connections Typical Water Supply Drain InstallationPotable Water Requirements Drain ConnectionsMinimum Power Cord Specifications Section Installation Instructions Electrical ServiceGround Fault Circuit Interrupter VoltageQuietqube Remote Condensing Unit RF2300RFactory Equipment Refrigeration Amounts Usage with NON-MANITOWOC Condensing UnitsPotential Personal Injury Situation Route Refrigeration Tubing GeneralRoof/Wall Penetration Line SET LengthSuction Line OIL Traps Service LoopLengthening or Reducing Line Set Lengths Connect the Line Set to the Remote Condensing Unit Installation Instructions SectionConnecting the line set Connect the Line Set to the Ice Machine Head SectionOpen Valves Leak Check The Refrigeration SystemOpen The Valves Prior To Starting The Ice Machine Torque ValuesInstallation Instructions Section Installation Check List Part Number 000007644 3/11 Section Operation RF0244/RF0266/RF0385/ RF0388/RF0399/RF0644 OperationSection Operation RFS0300 Operation RFS0650/RF1200/RF2300 OperationExterior Cleaning Section MaintenanceInterior Cleaning and Sanitizing Cleaning/Sanitizing ProcedureSection Maintenance Procedure to Clean Heavily Scaled Flake Ice MachinesMaintenance Section Removal of Parts for Cleaning/Sanitizing ICE Chute RemovalICE Chute Switch Actuator Removal Air-Cooled Condenser CleaningManitowoc Cleaner and Sanitizer Arctic Pure Water Filter SystemChecklist Section Customer SupportCustomer Support Customer Support Section Commercial Ice Machine Warranty Limited Warranty What is CoveredResidential Ice Machine Limited Warranty WHO is Covered by this Limited WARRANTY?Section Généralités Section Instructions d’installationTable des matières Section FonctionnementSection Service clientèle Table des matières suitePart Number 000007644 3/11 Section Généralités RF2300 Installation de l’adaptateur de bacRéférences des modèles Conditions requises d’installation Section Instructions d’installationEmplacement de la machine à glaçons Machine à glaçons Chaleur de rejetInstallation d’évacuation d’alimentation en eau type RF1200R/RF2300R Installation de conduitesConditions Requises Pour L’EAU Potable FUSIBLE/DISJONCTEUR Conditions électriques requisesRaccordements D’ÉVACUATION DifférentielInstructions d’installation Section Royaume-Uni uniquementMontants frigorifiques de l’équipement en usine Situation comportant un risque De blessure corporelleLongueur DES Conduites GénéralitésMontée OU Descente DE Conduites Boucle de service Siphons D’HUILE DE Conduite D’ASPIRATIONÉtape 4 Raccordement des conduites Connecter les conduites au condenseur à distanceValeurs de couple de serrage Ouvrir les robinetsÉtape 8 Exigences d’isolation Page Part Number 000007644 3/11 Section Fonctionnement RF0244/RF0266/RF0385/ RF0388/RF0399/RF0644 FonctionnementFonctionnement Section RFS0300 Fonctionnement RFS0650/RF1200/RF2300 FonctionnementNettoyage extérieur EntretienNettoyage et désinfection intérieurs Procédure de nettoyage et de désinfectionEntretien Section ’eau Uniquement Nettoyant EauDépose DE LA Goulotte À Glaçons Nettoyant et désinfectant Manitowoc Nettoyage du condenseur refroidi à l’airSystème de filtration d’eau Arctic Pure Dépose DE L’ACTIONNEUR D’INTERRUPTEUR DE Goulotte À GlaçonsSection Service clientèle Liste de vérificationService clientèle Section Garantie Limitée Période DE Cette Garantie Limitée Service clientèle Section Section Service clientèle Manitowoc

RF specifications

Manitowoc Ice RF is a leading series in the ice-making industry, renowned for its innovative technologies and commitment to efficiency. Designed to meet the high demands of commercial food service operations, the RF model features a range of cutting-edge attributes that set it apart from competitors.

One of the main features of Manitowoc Ice RF is its advanced refrigeration system. The machine employs an Adaptive Harvest Control technology that ensures consistent ice quality by continually monitoring the ice-making process and adjusting accordingly. This results in reliable production of clear, hard ice cubes without the usual inconsistencies found in other machines.

The Manitowoc Ice RF models are designed with energy efficiency in mind. They utilize high-efficiency compressors and optimized insulation methods, significantly reducing energy consumption compared to traditional ice machines. This not only contributes to cost savings for businesses but also aligns with environmentally conscious practices, helping to reduce the overall carbon footprint.

Another notable characteristic of the RF series is its streamlined design, which allows for easy installation and maintenance. The machines are compact, making them ideal for establishments with limited space. The removable panels and accessible components simplify routine cleaning and servicing, ensuring the unit operates at peak performance and extends its life cycle.

Food safety is another focus of the Manitowoc Ice RF series. The machines incorporate an internal, easy-to-clean design that minimizes the risk of contamination. The anti-microbial protection on key surfaces helps prevent the growth of harmful bacteria, ensuring that the ice produced is safe for consumption.

In addition to its robust construction and technology, Manitowoc Ice RF offers various production capacities, catering to different business needs. Whether in a bustling restaurant, a hotel, or a convenience store, there is a model that fits the required ice production volume.

Overall, the Manitowoc Ice RF series combines state-of-the-art technology, energy efficiency, and ease of use to provide an exceptional ice-making solution for commercial establishments. Its commitment to quality and innovation makes it a preferred choice for businesses aiming to enhance their food service operations while maintaining high standards of safety and efficiency.