Manitowoc Ice S600M manual Section Maintenance, Removal of Parts for CLEANING/SANITIZING

Page 27

Section 4

Maintenance

 

 

REMOVAL OF PARTS FOR CLEANING/SANITIZING

1.Turn off the electrical and water supply to the ice machine (and dispenser when applicable).

!Warning

Disconnect electric power to the ice machine (and dispenser if applicable) at the electric switch box before proceeding.

2.Remove all ice from the bin.

3.Remove the water curtain and the components you want to clean or sanitize. See the following pages for removal procedures for these parts.

!Warning

Wear rubber gloves and safety goggles (and/or face shield) when handling Ice Machine Cleaner or Sanitizer.

4.Soak the removed part(s) in a properly mixed solution.

Solution Type

Water

Mixed With

Cleaner

1 gal. (4 l)

16 oz (500 ml) cleaner

Sanitizer

4 gal. (15 l)

3 oz (90 ml) sanitizer

5.Use a soft-bristle brush or sponge (NOT a wire brush) to carefully clean the parts.

!Caution

Do not mix Cleaner and Sanitizer solutions together. It is a violation of Federal law to use these solutions in a manner inconsistent with their labeling.

!Caution

Do not immerse the water pump motor in the cleaning or sanitizing solution.

6.Use the sanitizing solution and a sponge or cloth to sanitize (wipe) the interior of the ice machine and the entire inside of the bin/dispenser.

7.Thoroughly rinse all of the parts and surfaces with clear water.

8.Install the removed parts.

NOTE: Incomplete rinsing of the ice thickness probe or water level probe may leave a residue. This could cause the ice machine to malfunction. For best results, brush or wipe the probes off while rinsing it. Thoroughly dry the probes before installing them.

9. Turn on the water and electrical supply.

Part Number 80-1629-3

4-5

Page 26 Page 28
Image 27
Page 26 Page 28
Contents S600M Model Ice Machines Personal Injury Potential Read These Before ProceedingSection Installation Instructions Table of Contents Section General InformationTable of Contents Section Ice Machine Operation Section MaintenanceSection Before Calling For Service Ice Cube Sizes How to Read a Model NumberSection General Information Model NumbersGeneral Information Section Accessories Model/Serial Number Location Section General Information Model/Serial Number LocationWarranty Coverage Ice Machine Dimensions GeneralS600M WATER-COOLED ICE Machines Ice Machine Heat of Rejection Installation Instructions Section Location of Ice MachineElectrical Requirements Section Installation Instructions Electrical ServiceVoltage Minimum Circuit AmpacitySelf Contained ICE Machine 230/1/50 For United Kingdom OnlySelf Contained ICE Machine 115/1/60 or 208-230/1/60 Self Contained ICE Machine 208-230/3/60Drain Connections Cooling Tower ApplicationsWater Supply Water Inlet LinesInstallation Instructions Section Typical Water Supply Drain InstallationWater Supply and Drain Line SIZING/CONNECTIONS Section Installation Instructions Installation Check List Potential Personal Injury Situation AuCS Automatic Cleaning SystemComponent Identification Section Ice Machine OperationInitial START-UP or START-UP After Automatic SHUT-OFF Ice Machine Operation Section Sequence Of OperationAutomatic SHUT-OFF 7. Automatic Shut-Off Safety TimersHarvest Sequence 5. Water Purge HarvestIce Thickness Check Ice Machine Operation Section Operational ChecksWater Level ICE Thickness CheckHarvest Sequence Water Purge Water Purge AdjustmentIce Machine Operation Section AlphaSan→ Exterior CleaningIce Machine Inspection Water-Cooled Condenser Water Regulating ValveClean UP Procedure for Damaged Sachet Packet Maintenance Section GuardianGuardian Sachet Replacement Frequency Sachet Replacement ProcedureSection Maintenance Interior Cleaning and Sanitizing Cleaning ProcedureStep Sanitizing Procedure Maintenance SectionRemoval of Parts for CLEANING/SANITIZING Water Curtain Water Curtain Removal Ice Thickness ProbeIce Thickness Probe Removal Water Distribution Tube Water TroughWater Distribution Tube Removal Water Level Probe Water PumpWater Pump Removal Water Dump Valve Dump Valve DisassemblyDrain Line Check Valve Evaporator Tray RemovalWater Inlet Valve Removing the Front PanelsMaintenance Section Removal from Service/Winterization Pry Open the Water Regulating Valve AUCS→ AccessoryWATER-COOLED ICE Machines Checklist Section Before Calling For ServiceSafety Limit Feature Before Calling For Service SectionThis page Intentionally Left Blank Before Calling For Service Section Page Manitowoc ICE, INC

S600M specifications

The Manitowoc Ice S600M is a standout model in the ice machine market, recognized for its high performance, innovative features, and reliability. Designed specifically for restaurants, bars, and various foodservice operations, this ice machine offers a range of capabilities that cater to the diverse needs of commercial establishments.

One of the key features of the Manitowoc S600M is its impressive ice production capacity. It can produce up to 550 pounds of ice in a 24-hour period, making it suitable for busy environments where high volumes of ice are needed. The machine utilizes a modular design, allowing it to work seamlessly with different storage bins and provides flexibility in placement.

The S600M is equipped with advanced technologies that enhance efficiency and ease of use. One notable technology is the Smart LED lighting, which ensures users can easily monitor and maintain the equipment. This smart feature provides real-time indications regarding the ice production process, alerting operators to issues such as water supply problems or the need for maintenance.

Another significant aspect of the S600M is its energy efficiency. The machine is designed with innovative insulation that minimizes temperature fluctuations, thereby reducing energy consumption. This not only contributes to lower operational costs but also aligns with environmentally friendly practices—a crucial consideration for modern businesses.

In terms of the ice itself, the Manitowoc S600M produces traditional cube-shaped ice, known for its slower melting rate and ideal for various drinks and cocktails. This type of ice is essential for maintaining beverage quality over extended periods, making it a popular choice among foodservice operators.

The machine is also designed with ease of maintenance in mind. It features a self-contained refrigeration system and removable panels, allowing for easy access to internal components. This design minimizes downtime and facilitates regular cleaning and maintenance, ensuring consistent ice production.

In summary, the Manitowoc Ice S600M is an exceptional choice for businesses seeking a reliable and efficient ice machine. With its high production capacity, advanced technologies, energy efficiency, and user-friendly design, it meets the contemporary demands of the foodservice industry. Investing in the S600M means ensuring an uninterrupted supply of quality ice, essential for exceptional customer service and operational success.
Top Page Image Contents