Graco 3A0237L Connect Heated Hoses, Single Heat Zone with a and B Heated Hose, Strip Length

Connect Heated Hoses

1.Lay heated hoses end to end, matching the color coding. Red for component A (ISO), blue for compo- nent B (RES).

Installation

4. Connect air hoses (C).

Single Heat Zone with A and B Heated Hose

D

C

B

TI14733a

Dual Heat Zone with A and B Heated Hose

A

FIG. 3

TI14731a

D

C

D

TI15097a

Single Heat Zone with A or B Heated Hose

2.Connect fluid hoses (A, B).

3.Connect signal cables (13).

B

A

13 TI14732a

FIG. 4

NOTE: Do not connect the main air supply to the air hose at this time.

D

C

D TI15140a

FIG. 5

5.Connect electrical wires (D).

a.Ensure electrical wires ends are 5/8 in. (0.625mm) long. If they are not, use a sharp scissors to strip all four wire ends to the correct length. See Strip Length Gauge for correct length.

Strip Length

This illustration is not to scale.	5/8 in.
	(0.625 mm)

TI9733a

FIG. 6

3A0237L 17