The correct temperature
Setting the temperature
The temperatures for the refrigerator section and the freezer section are set separately.
Select the refrigerator or the freezer section.
The Refrigerator or Freezer symbol lights up yellow.
Set the temperature with the buttons beside the display.
Tap the
button: to decrease the temperature
button: to increase the temperature.
The temperature being set will flash in the display.
When you tap the buttons, you will see the following changes in the temperature display:
–When first tapped: The last temperature selected flashes.
–Each subsequent tapping: adjusts the temperature in increments of 1°F / 1°C.
–Holding down the button will adjust the temperature continuously. When the highest / lowest temperature is reached the / button disappears.
Approximately 5 seconds after you release the button, the actual average temperature in the refrigerator or freezer section will automatically be displayed.
If you have adjusted the temperature, wait approx. 6 hours if the appliance is not very full or approx. 24 hours if it is full before checking the temperature display again. It will take that long to reach the selected temperature. If, after this amount of time, the temperature is too high or too low, you will need to adjust it again.
Temperature ranges
The temperature can be selected within the following ranges:
–In the refrigerator section, from 36 to 44°F (2°C to 7°C).
–In the freezer section, 6 to
The ambient temperature in the room and the installation location can affect the time it takes for the appliance to reach the coldest temperature. If the ambient temperature is too high, it may not be possible for the appliance to reach the lowest temperature.
20