Changing the door hinging
Hang the panel on the shock absorber arm .
Pull the shock absorber arm towards the hinge bracket and insert the pin from the top so that the square rests in the recess.
Put on the cover in such a way that it engages.
Take care that the cover sits correctly to ensure that the door closes properly and the pin is secured.
Remove the securing device .
Place the panel onto the
Close the bottom door of the appliance.
Mounting the top door of the appliance:
Place the top door of the appliance onto the bearing pin in in the middle of the appliance.
Close the top door of the appliance. |
Put the hinge bracket on the opposite side and and fasten it with the screws .
The screw holes may have to be
Now place the cover on the other side.
Align the appliance door with the appliance housing via the elongated holes in the bottom hinge bracket . Tighten the screws.
63