Water supply
Notes on connecting to the water supply
The appliance must be connected to the water supply by a qualified professional.
The water being used should meet the drinking water standards of the country where the machine is used.
–The appliance is in compliance with the requirements of IEC 61770 and EN 61770.
–All units and systems used to deliver the water to the appliance must conform with the regulations of the respective country.
–The appliance must be connected to a cold water supply only.
–The water pressure must be between 1.5 and 6 bar.
–The stainless steel hose is 1.5 m long.
The stainless steel hose can be lengthened with an extension hose. It must be fitted by a qualified technician.
The extension hose is available from Miele Customer Service.
–A water
The water
Connecting to the water supply
Disconnect the refrigerator/freezer from the electric power supply prior to connecting to the water supply.
A water
Connect the straight end of the stainless steel hose to the water
Ensure that it is properly screwed into position.
Before using the appliance for the first time, the water supply line needs to be purged of air by a qualified technician:
–The stainless steel hose should be filled with as much water as possible immediately before connecting to the solenoid valve.
–Mop up any spillage with a cloth.
50