Making ice cubes
For the automatic ice cube maker to operate it must be connected to the household water line.
Switching the ice cube maker
ON
Switch the freezer section on.
Slightly open the top left drawer in the freezer section.
Press the ON/OFF button on the ice cube maker, and the indicator light will come on.
Close the drawer.
The drawer must be completely shut for ice cubes to be produced.
After the appliance is turned on for the very first time, it can take up to 24 hours for the first ice cubes to drop out of the ice cube maker into the drawer. Thereafter, when the ice cube maker is switched off and then on again it will take a maximum of 6 hours for ice to be produced.
To ensure that the water pipes are thoroughly flushed through, you must not consume the first three batches of ice from the ice maker. This applies not only when the appliance is used for the very first time, but also if it has been out of use for a longer period of time.
Making a large amount of ice cubes
The amount of ice cubes produced depends on the temperature in the freezer section. The lower the temperature, the more ice cubes are produced within a given period of time.
Once the ice cube drawer is full, ice cube production is automatically halted.
If you require a large amount of ice cubes,
replace the full ice cube drawer with the drawer beside it on the right.
Once the empty drawer has been placed and closed properly, the ice cube maker will begin to produce ice cubes again.
35