Changing the door hinging
Mounting the top soft-close mechanism:
Remove the cover from the panel , turn it 180° and replace it on the other side.
Hook the spacer on the handle side into the retainer (A).
Hook the
Push both parts outwards until they engage.
With the three screws , first screw on the spacer on the handle side and then the
Hang the panel on the shock absorber arm .
Push the cover on from the side so
that the openings for the pin are on top of each other.
Pull the shock absorber arm towards the hinge bracket and insert the pin from the top so that the square rests in the recess.
Then engage the cover completely.
Take care that the cover sits correctly to ensure that the door closes properly and the pin is secured.
64