Aligning the appliance doors
The appliance doors can be aligned with the appliance housing afterwards.
In the following figure, the appliance door is not closed so that the individual steps can be seen more clearly.
Align the bottom door in the bottom hinge bracket via the outer, elongated holes:
Remove the middle screw from the hinge bracket.
Loosen the two outer screws slightly.
Align the appliance door by moving the hinge bracket to the right or left.
Tighten the screws ; the screw does not need to be screwed on again.
Align the top door via the elongated holes in the middle hinge bracket:
Loosen the three screws slightly.
Align the appliance door by moving the hinge bracket to the right or left.
Tighten the screws .
66