Water softener
To set the water softener for a hard- ness level of
Check that the water hardness selec- tor in the wash cabinet is set to set- ting 6.
Turn the dishwasher off.
Turn the program selector knob to the “STOP” position.
Press the “Delay start” and “START” buttons at the same time, while turn- ing the machine on. A “P” and a num- ber will appear in the time display.
Set the program selector knob to the “NORMAL 55/130” position. The number “22” will appear in the time display.
“22” = The factory setting for a water hardness of 22 gr/gal.
Press the “Top Solo” button as often as necessary until the value of your water hardness in gr/gal appears in the display.
Example:
For a water hardness of 30 gr/gal:
Keep pressing the “Top Solo” button until “30” appears in the time display.
After the figure “36” is reached the counter returns to “0”.
Value “0” must not be set!
Press the “START” button twice to store the change in memory.
12