Dishwasher installation
6. Adjusting the door springs.
The door springs are adjusted correctly when a half opened door remains in that position when released.
If the door drops down, the springs need to be tightened.
If the door closes, the springs need to be loosened.
The adjusting screw is located in the upper front strip, on the left hand side of the dishwasher.
Open the dishwasher door.
Adjust the door springs to the cor- rect balance:
–turn clockwise to tightened
–turn counterclockwise to loosen.
7.Securing the dishwasher to the countertop.
To ensure the stability of the dish- washer, it must be attached to the countertop after it has been positioned.
Open the dishwasher door.
Using the screws provided, fasten the dishwasher to the countertop through the two holes located on the upper rim.
The weight of the machine must be supported by the legs, not the countertop fastening screws. If securing the top takes the weight off of the legs, extend the legs further until they are tight against the floor.
Do not drill any additional holes through any portion of the wash cabinet. If in doubt about how to se- cure the dishwasher, please call the Miele Service Department.
49