Zebra Technologies Z6M WEB S Media S, Ribbon S, Take Label S, Media LED, Ribbon LED, LCD Adjust

Display Shows	Action/Explanation
WEB S.
MEDIA S.	These parameters are automatically set during the calibration procedure. They
RIBBON S.	should only be changed by a qualified service technician. Refer to the
TAKE LABEL S.	maintenance manual for more information on these parameters.
MEDIA LED	Press the SELECT key repeatedly to skip these parameters.
RIBBON LED
	LCD Display Adjustment: Press the DECREMENT (–) key to decrease the
	value (reduce brightness), press the INCREMENT (+) key to increase the value
LCD ADJUST	(increase brightness).
	Range: 00 to 19
	This parameter allows you to adjust the brightness of your display if your display
	is difficult to read.
	Format Convert: Press the INCREMENT (+) or DECREMENT (–) key to
	display other choices.
FORMAT CONVERT	Default: None
	Selections: None, 150 V 300, 150 V 600, 200 V 600, 300 V 600
	Selects the bitmap scaling factor. The first number is the original dots per inch
	(dpi) value; the second is the dpi to which you would like to scale.
	Password Level: Press the INCREMENT (+) or DECREMENT (–) key to
	display other choices.
	Default: Selected items
PASSWORD LEVEL	Selections: Selected items, all items
	This parameter allows you to select whether certain Zebra-selected menu items
	(”selected items”) or all menu items (”all items”) are password protected.

52 Zebra Z4M/Z6M Printers User’s Guide