Display Shows | Action/Explanation |
Initialize Memory Card
CAUTION: Perform this operation only when it is necessary to erase all previously stored information from the optional memory card. Press the SETUP/EXIT key to bypass this function.
1.Press theINCREMENT(+)keytoselect “YES.”
2.The display asks “INITIALIZE CARD?”. Press the INCREMENT (+)
| key to select “YES.” |
3. | The front panel LCD asks “ARE YOU SURE?”. |
INITIALIZE CARD 4. | Press the INCREMENT (+) key “YES”to begin initialization. |
Press the DECREMENT
5.Press the SETUP/EXIT key followed by the SELECT key. If initialization is still in process, the front panel display flashes back and forth between
the two phrases “CHECKING B: MEMORY” and “PRINTER IDLE.” When initialization is complete, the printer automatically exits the configuration mode and the front panel displays “PRINTER READY.”
NOTE: Depending on the amount of memory in the memory card, initialization may take up to five minutes to complete.
Initialize Flash Memory
CAUTION: Perform this operation only when it is necessary to erase all previously stored information from the FLASH memory. Press the SETUP/EXIT key to bypass this function.
1. Press theINCREMENT(+)keyto select“YES.”
2.The display asks “INITIALIZE FLASH?”. Press the INCREMENT (+) key to select “YES.”
INIT FLASH MEM 3. The front panel LCD asks “ARE YOU SURE?”.
4.Press the INCREMENT (+) key “YES”to begin initialization.
Press the DECREMENT
5.Press the SETUP/EXIT key followed by the SELECT key. If initialization is still in process, the front panel display flashes back and forth between the two phrases “CHECKING E: MEMORY” and “PRINTER IDLE.” When initialization is complete, the printer automatically exits the configuration mode and the front panel displays “PRINTER READY.”
NOTE: Depending on the amount of free FLASH memory, initialization may take up to one minute to complete.
44 | Zebra Z4M/Z6M Printers User’s Guide |
