Zebra Technologies Z6M manual Default Dynamic, Default All

Display Shows	Action/Explanation
	IP Resolution: Press the INCREMENT (+) or DECREMENT (–) key to display
	other choices.
	Default: Dynamic
IP RESOLUTION*	Selections: Dynamic, permanent
	Depending on the selection, allows either the user (”permanent”) or the server
	(”dynamic”) to select the IP address. For more information, refer to ZebraNet
	Networking: PrintServer II Installation and User’s Guide.
	IP Protocols: Press the INCREMENT (+) or DECREMENT (–) key to display other
	choices.
	Default: All
IP PROTOCOLS*	Selections: All, gleaning only, RARP, BOOTP, DHCP, DHCP/BOOTP
	If “dynamic” was chosen in the previous parameter, this selection determines the
	method(s) by which the PrintServer II receives the IP address from the server. For
	more information, refer to ZebraNet Networking: PrintServer II Installation and
	User’s Guide.
	IP Address: Press the DECREMENT (–) key to move to the next digit position,
	press the INCREMENT (+) key to increase the value of the digit.
IP ADDRESS*	This parameter allows you to select the IP address if “permanent” was chosen in “IP
	RESOLUTION.” (If “dynamic” was chosen, the user cannot select the address.)
	For more information, refer to ZebraNet Networking: PrintServer II Installation and
	User’s Guide.
	Subnet Mask: Press the INCREMENT (+) or DECREMENT (–) key to display
	other choices.
SUBNET MASK*	Default: Permanent (user must set)
	Selections: Dynamic (user may set, but server can assign), permanent
	This parameter selects the part of the IP address that is considered to be part of the
	local network. It can be reached without going through the default gateway.
	Default Gateway: Press the DECREMENT (–) key to move to the next digit
DEFAULT	position, press the INCREMENT (+) key to increase the value of the digit.
GATEWAY*	This parameter allows you to select the IP address that the network traffic is routed
	through if the destination address is not part of the local network.

* ZebraNet® PrintServer II option required

Zebra Z4M/Z6M Printers User’s Guide 53