Label Positioning Parameters
Display Shows | Action/Explanation |
| Backfeed Sequence: Press the INCREMENT (+) or DECREMENT |
| display other choices. |
| Default: Default (90%) |
| Selections: Default, after, before, 10%, 20%, 30%, 40%, 50%, 60%, 70%, |
| 80%, off |
| This parameter establishes when and how much label backfeed occurs after a |
BACKFEED | label is removed or cut in the |
| or |
| instruction when received as part of a label format (refer to the ZPL II |
| Programming Guide Volume I). |
| NOTE: The difference between the value entered and 100% establishes how |
| much backfeed occurs before the next label is printed. For example, a |
| value of 40 means that 40% of the backfeed takes place after the label is |
| removed or cut. The remaining 60% takes place before the next label is |
| printed. A value of “before” means that all backfeed takes place before |
| the next label is printed. |
|
|
| Adjusting Label Top Position: Press the INCREMENT (+) key to increase the |
| value, press the DECREMENT |
| value represents dots. |
| Default: +0 |
LABEL TOP | Range: |
| The label top position adjusts the print position vertically on the label. Positive |
| numbers adjust the label top position further down the label (away from the |
| printhead); negative numbers adjust the position up the label (toward the |
| printhead). |
|
|
| Adjusting Left Position: Press the DECREMENT |
| position, press the INCREMENT (+) key to change between + and – and to |
| increase the value of the digit. The displayed value represents dots. |
| Default: 0000 |
| Range: |
LEFT POSITION | NOTE: For a negative value, enter the value before changing to the minus |
| sign. |
| This parameter establishes how far from the left edge of a label the format |
| begins to print by adjusting horizontal positioning on the label. Positive numbers |
| adjust the printing to the left by the number of dots selected; negative numbers |
| shift printing to the right. |
|
|
Zebra Z4M/Z6M Printers User’s Guide | 51 |
