Zebra Technologies Z6M manual OHDQLQJWKH3RZHU3HHO5HZLQG0RGXOH

&OHDQLQJ￿WKH￿3RZHU￿3HHO￿5HZLQG￿0RGXOH

(Power peel/rewind option required)

Perform the following procedure if adhesive buildup begins to affect peel performance.

Refer to Figure 25.

1.Open the printhead assembly.

2.Close the value peel assembly (if open) to prevent bending the tear-off/peel-off bar during cleaning. Use a swab or cue tip soaked with a solvent to remove adhesive from the tear-off/peel-off bar.

CAUTION: Apply minimum force when cleaning the tear-off/peel-off bar! Excessive force can cause the tear-off/peel-off bar to bend, which could have a negative effect on peel performance.

3.Open the value peel assembly by pivoting the module toward you.

4.Manually rotate the pinch roller and clean thoroughly with solvent and a swab.

NOTE: When cleaning the tear-off/peel-off bar or the pinch roller, remove excess solvent with a pad to ensure the solvent has dried before printing.

5.Close the value peel assembly.

6.Close the printhead assembly.

Printhead Assembly

Tear-off/Peel-off Bar

Pinch Roller

Value Peel Assembly

Figure 25

62 Zebra Z4M/Z6M Printers User’s Guide