Zebra Technologies Z6M manual Media Removal

14.Slide the rewind media guide against the media, and tighten the thumbscrew to lock it into position.

15.Close the printhead assembly.

16.If the printer is paused (the PAUSE light is on), press the PAUSE key to enable printing.

Transmissive	Media Supply Guide
Sensor

Value

Peel Printhead

Lever Assembly

Value
Peel
Assembly	Dancer	Media
Rewind		Supply
		Hanger
Base
Assembly		Take-up
		Spindle
Printhead		Rewind
Open Lever
		Media
		Guide

Ribbon Media Media Thumbscrew

Sensor Alignment

Spindle

Guide

Figure 19

Media Removal

1.Cut the media between the media alignment spindle and the take-up spindle.

2.Rotate the take-up spindle counterclockwise until the rewind media guide is in the “12 o’clock” position.

3.Loosen the thumbscrew and slide out the rewind media guide to the end of the take-up spindle.

4.Slide the core with the roll of media from the take-up spindle.

Zebra Z4M/Z6M Printers User’s Guide 31