Selecting ZPL Mode
Display Shows | Action/Explanation |
| Selecting ZPL Mode: Press the INCREMENT (+) or DECREMENT |
| display other choices. |
| Default: ZPL II |
| Selections: ZPL II, ZPL |
ZPL MODE | The printer remains in the selected mode until it is changed by this front panel |
| instruction or by using a ZPL/ZPL II command. The printer accepts label formats |
| written in either ZPL or ZPL II. This eliminates the need to rewrite any ZPL |
| formats you already have. Refer to the ZPL II Programming Guide Volume II for |
| more information on the differences between ZPL and ZPL II. |
|
|
| |
|
|
| Media Power Up: Press the INCREMENT (+) or DECREMENT |
| display other choices. |
| Default: Feed |
| Selections: Feed, calibration, length, and no motion |
MEDIA POWER UP | This parameter establishes the action of the media when the printer is turned on. |
| • Calibration: Recalibrates the media and ribbon sensors. |
| • Feed: Feeds the label to the first web. |
| • Length: Determines the length of the label. |
| • No Motion: Media does not move. |
|
|
| Head Close: Press the INCREMENT (+) or DECREMENT |
| other choices. |
| Default: Feed |
| Selections: Feed, calibration, length, no motion |
HEAD CLOSE | Determines the action of the media after the printhead has been opened and |
| then closed. |
| • Calibration: Recalibrates the media and ribbon sensors. |
| • Feed: Feeds the label to the first web. |
| • Length: Determines the length of the label. |
| • No Motion: Media does not move. |
|
|
50 | Zebra Z4M/Z6M Printers User’s Guide |
