3ULQWHU3RZHU
The power supply in the printer automatically detects the applied line voltage and works in the 90 to 265 VAC range.
:$51,1*)RUSHUVRQQHODQGHTXLSPHQWVDIHW\DOZD\VXVHD
WKUHHSURQJSOXJZLWKDQHDUWKJURXQGFRQQHFWLRQ
NOTE: Depending on how your printer was ordered, a power cord may or may not be included. If one is not included, or if the one included is not suitable for your requirements, refer to “Power Line Cord Specifications” on page 85.
1.Make sure that the POWER switch (see Figure 1) is in the “off” (O) position before connecting the power cord.
2.Plug the female end of the power cord into the connector at the rear of the printer.
3.Plug the male end of the power cord into a live AC outlet.
AC
Power
Switch
Connector
Figure 1
Zebra Z4M/Z6M Printers User’s Guide | 3 |
