)(('.H\6HOI7HVW
See Figure 32.
1.Turn off the printer.
2.Press and hold the FEED key while turning on the power.
3.Release the FEED key after the DATA light turns off (approximately five seconds).
The FEED Key Self Test prints out at various darkness settings above and below that of the darkness value shown on the configuration label. Examine these labels and determine which one has the best darkness setting for your application. This value can be entered into the printer by setting the darkness during the configuration procedure. Refer to page 40 for more information.
Figure 32
The value printed on that label is added to (plus) or subtracted from (minus) the darkness value specified on the configuration label. The resulting numeric value (0 to 30) is the best darkness value for that specific media/ribbon combination.
78 | Zebra Z4M/Z6M Printers User’s Guide |
