Zebra Technologies Z6M manual Rdglqjdfwru\Hidxowv, RPPXQLFDWLRQVLDJQRVWLFV7HVW

&RPPXQLFDWLRQV￿'LDJQRVWLFV￿7HVW

This test is controlled from the front panel display. Refer to page 48. A typical printout from this test is shown in Figure 33. Turn off the power to exit this self test.

NOTE: This label is inverted when printed.

Figure 33

/RDGLQJ￿)DFWRU\￿'HIDXOWV

1.Press the SETUP/EXIT key two times.

2.Use the INCREMENT (+) or DECREMENT (–) key to scroll through the “SAVE CHANGES” choices.

3.When “LOAD DEFAULTS” displays, press the SETUP/EXIT key.

Zebra Z4M/Z6M Printers User’s Guide 79