Zebra Technologies Z6M manual Default Even, Default XON/XOFF, Default None

Display Shows	Action/Explanation
	Setting Parity: Press the INCREMENT (+) or DECREMENT (–) key to display
	other choices.
	Default: Even
PARITY	Selections: Even, odd, none
	The parity of the printer must match the parity of the host computer for accurate
	communications to take place. Select the parity that matches the one being
	used by the host computer.
	Setting Host Handshake: Press the INCREMENT (+) or DECREMENT (–) key
	to display other choices.
	Default: XON/XOFF
HOST HANDSHAKE	Selections: XON/XOFF, DTR/DSR
	The handshake protocol of the printer must match the handshake protocol of the
	host computer for communications to take place. Select the handshake protocol
	that matches the one being used by the host computer.
	Setting Protocol: Press the INCREMENT (+) or DECREMENT (–) key to
	display other choices.
	Default: None
	Selections: None, Zebra, ACK_NACK
	Protocol is a type of error checking system. Depending on the selection, an
PROTOCOL	indicator may be sent from the printer to the host computer signifying that data
	has been received. Select the protocol that is requested by the host computer.
	Further details on protocol can be found in the ZPL II Programming Guide
	Volume I.
	NOTE: Zebra is the same as ACK_NACK except that with Zebra the response
	messages are sequenced.
	NOTE: If Zebra is selected, printer must use DTR/DSR host handshake
	protocol.

Zebra Z4M/Z6M Printers User’s Guide 47