Operating the dishwasher.
Turning on.
Close the door.
Open the water valve (if it is closed).
Press the
When the program and temperature se- lector knob (21) is in the “STOP” posi- tion, a dot will light up in the display field (17).
Starting a program.
Turn the program and temperature selector knob (21) clockwise or counterclockwise to the desired pro- gram.
The length of the selected program ap- pears in hours and minutes in the Time display (17).
At the same time the indicator lamp next to the
Before starting the program, addi- tional features “Delay start” or “Top Solo” can be selected (see “Addi- tional features” on page 30).
Press the “START”
The indicator lamp next to the “START”- button will go out, and the program will start.
Note.
The time displayed may vary using the same program. When the dishwasher is turned on, it will display a Wash time calculated using a water supply tem- perature of 60 °F/15 °C. (the tempera- ture used for factory testing).
With subsequent programs the dish- washer will recalculate the time accord- ing to actual conditions. The most cur- rent value will then be displayed the next time the dishwasher is turned on.
The time remaining is displayed as the program progresses.
To prevent children from coming into contact with detergent, only place it in the dispenser immediate- ly before starting the program.
Program end
The program has finished when no indi- cator lamps are illuminated and a “0” appears in the display. the dishwasher can now be unloaded.
If the dishwasher door remains closed, the drying fan will continue to operate for a few additional minutes to help dissipate any remaining moisture.
28