Miele M.-NR. 04 390 922 Turning off, Sequence indicator, Interrupting a program

Page 29

Operating the dishwasher.

Turning off.

At the end of a program:

Turn the program selector knob to the “STOP” position.

If any appliance will not be used for an extended period (e.g. while on vaca- tion), it is recommended that the water supply valve be shut off.

Your Miele dishwasher is designed to shut off the water flow and drain the machine in the rare event of a valve failure. In order for this func- tion to be active, the door must be shut, the machine must be “ON”, and the Program knob must be in the “STOP” position.

Sequence indicator (20).

Once a program has started, the se- quence indicator lamps (20) show the actual program stage reached by the dishwasher.

Note:

When required, the water softener reactivation process is performed before the wash program. It may last several minutes and occurs in intervals.

During this process only the “Sof- tener” indicator will be on.

The hardness of the water supply will dictate how often (after how many washes) the water softener needs to be reactivated. For example, with a water hardness of 21 gr/gal, reactivation will take place after every 3 programs. With a water hardness of 8 gr/gal, reactivation

will only take place after 11 programs.

Interrupting a program.

A program can be interrupted by open- ing the door.

If the door is then closed, the program will continue from the point it was at be- fore the door was opened.

Warning!

The water in the dishwasher may be hot, and steam may be present! Only open the door if absolutely necessary and exercise extreme caution when doing so. The danger of burns and scalding exists. Once the door has been opened, allow 20-30 seconds for the inter- nal temperature to equalize before closing it again, and make sure it clicks into place.

Changing a program.

A program can be changed at any time. The new program will start as soon as it has been selected.

Turn the program selector knob to the desired program.

If you wish to start the new program at its beginning:

Turn the program selector knob to “STOP”,

(a point will appear in the display field).

Select the new program and press “START”.

It may be necessary to add additional detergent, depending on where the original program was interrupted.

29

Image 29
Contents For dishwashers Contents Dishwashers Guide to the applianceIntegrated i dishwashers Guide to the appliance Guide to the appliance Important Safety Instructions Important Safety Instructions Disposal of the packing material Caring for the environmentDisposal of your old machine Energy saving washingBefore using for the first time Opening and closing the door Child safety lockTo open the door To close the doorWater softener SettingsWater softener For Hardness Filling the salt reservoir Bypassing the Salt indicator lamp Salt indicatorAdding rinse aid Adding rinse aidSetting the dosage Loading the dishwasher Upper basket Loading examplesBottom basket Cutlery trayLoading the dishwasher Adjustable cup racks Coffee bar Adjusting the upper basket Please note Items not suitable for dishwashersDo not use gels or liquid deter- gents Adding detergentEnergy Saver Program Choosing a programIntensive Program chartUsage Turning on Operating the dishwasherStarting a program Program endInterrupting a program Sequence indicatorTurning off Delay start Additional featuresTop Solo Unloading the dishwasher Cleaning the filters in the wash cabinet Cleaning and careCleaning and care Cleaning the spray arms Cleaning the drain pump and non-re- turn valve Cleaning the filter Cleaning the water inlet filterCleaning the door panel Installing an in-line water filterCleaning the control panel Problems/possible causes Problem solving guideSpray arm indicator lamp flashes Dishwasher does not startWater remains in the dishwasher at the end of a program Dishes are not cleanWhite residue is visible on cutlery and dishware Program update function PC After sales serviceBottle holder AccessoriesInstall the steam deflector, if applicable Dishwasher installationInstall the slides Install the dishwasher under the countertopDishwasher installation If the GDU decor set is being used Installing the control panelAligning the control panel with the drawer fronts Installing the custom door panelAttaching the panel Securing the dishwasher to the countertop Adjusting the door springsFor openings greater than 23 5/8 Cm wide For kitchens utilizing one continuous toekick Installing the toekickFor openings 23 5/8 60 cm wide For kitchens utilizing a non-continuous toekick Adjusting the toekick recessTrimming the toeckick Electrical connection SpecificationsUsing an outlet Permanent Connection Hard Wiring New plumbing PlumbingHot water connection Existing plumbing Drain connection Drain system specificationsDo not shorten the drain hose Additional note Venting the drainage systemTechnical Data Page Page