Extron electronic DVS 204 D Image Adjustments, Exit Menu, DVS 204 Installation and Operation

Exit Menu

From this submenu, press the Next button to return to the Default menu cycle, or press the Menu button to return to the Input Configuration menu.

EXTRON DVS204D

MENU

INPUT

CONFIG

MENU

BLANKING

CONFIG

MENU

MEMORY PRESET

MENU

ADVANCED

CONFIG

MENU

EXIT

MENU

MENU

NEXT

Image Adjustments

Image adjustments apply to scaled video output only; RGB signals are passed through without adjustments. Sizing and centering image adjustments can be stored in memory as a preset (see the “Memory Preset” section in this chapter) and can be set separately for each input.

Color, tint, brightness, contrast, centering, sizing

Power

on

To adjust an image for color, tint, brightness, contrast, centering, or sizing follow the steps below. An example of making color adjustments, shown in the following flowchart, demonstrates the process, which is similar for all the other image adjustments.

1.Press the input selection button of the input you wish to adjust.

2.Toggle the appropriate image adjustment button (Color/Tint, Brightness/ Contrast, Centering, and Sizing). The LCD display will show the name of the adjustments and the value of the current setting.

				2 sec.		2 sec.
EXTRON		852 x		INPUT 1		NO
DVS204D	2 sec.	480 @60	2 sec.	CMPOSITE	2 sec.	SIGNAL

Input

selection

button

*The No Signal default menu only occurs if there is no signal present at the currently selected input connector.

	INPUT 3
	S-VIDEO
	COL/TNT
Col		Tint
128	114

10 sec. timeout

NOTE The Adjust horizontal knob and the Adjust vertical knob are used to adjust the image settings on the left and right sides of the LCD screen, respectively.

DVS 204 • Installation and Operation 2-17