Extron electronic DVS 204 12V, DVS 204 D 12V manual Appendix, cont’d, A-8 DVS 204 Appendix

Appendix, cont’d

order to prevent bending the pins, before pressing the SDI card firmly in place against the standoff. The mounting hole on the SDI card should now be directly over the standoff.

20-pin socket on back of SDI card

20-pin connector on main board

7.Insert the card’s installation screw through the SDI card’s mounting hole and gently tighten it into the standoff.

8.Install the SDI connector’s hex nut and keep the SDI card from twisting as the nut is tightened.

9.Replace the top cover on the DVS 204 scaler, and fasten it with the screws that were removed in step 3.

10.Rack/furniture mount the scaler, and reconnect the AC power cord.

A-8 DVS 204 • Appendix