Extron electronic DVS 204 12V, DVS 204 D 12V manual Rear Panel Features, Installation and Operation

Installation and Operation

Rear Panel Features

The rear panels of the DVS 204 D and DVS 204 D 12V models, as shown below, contain all of the possible connectors available on the DVS 204 series of scalers (the DVS 204 and DVS 12V models do not come with an SDI input connector).

	2	5			9
100-240V 0.3A	VIDEO	SDI	INPUTS	OUTPUTS	REMOTE
			R	G	B
		B-Y	/R-Y	/Y	/B-Y
		/C
	1		RGB
		S-VIDEO	PASS - THRU/		RGB/R-Y,Y,B-Y
	R-Y		RGBS/RGBcvS	V
		Y	H		S
		/VID

50/60 Hz	2		3	4
1	3	4	6	7	8

DVS 204 D rear panel connectors

	VIDEO			INPUTS	R	OUTPUTS	REMOTE
		B-Y		SDI		G	B
					/R-Y	/Y	/B-Y
		/C
	1			RGB
POWER			S-VIDEO	PASS - THRU			RGB/R-Y,Y,B-Y
12V 1.5A DC	R-Y	Y		RGBS/RGBcvS	H	V
							S
		/VID
		2	3		4

1a

DVS 204 D 12V rear panel power connector

The rear panel connectors of the 12V DC models are identical to those of the

AC models, except for the 12 volt power input connector.

1AC power connector — Plug a standard IEC power cord into this connector to connect the scaler to a 100 to 240 VAC, 50 Hz or 60 Hz power source. The front panel control and input selection LEDs will light during power-up.

1a 12V DC power connector — Plug the included 12 V power supply into this input jack (DVS 204 12V and DVS 204 D 12V models only). The front panel control and input selection LEDs will light during power-up.

2

3

Video input 1: Composite video — A composite video signal is	VIDEO
input through the female BNC connector.

1

Video input 2: Composite/S-video/Component — This input, consisting of 3 female BNC connectors, accepts composite video, S-video, and component video signals. Connect cables for the appropriate signal type, as shown here.

Composite Video		S-video (Y/C)		Component Video (R-Y, Y, B-Y)
	B-Y		B-Y		B-Y
	/C		/C		/C
R-Y	Y	R-Y	Y	R-Y	Y
	/VID		/VID		/VID
	2		2		2

2-4 DVS 204 • Installation and Operation