Adjusting the interior fittings
Moving the shelves
The shelves in the refrigerator section can be adjusted according to the height of the food.
^Lift the shelf, pull it forwards slightly, lift the recess over the support ribs and move the shelf up or down.
The edge of shelf's rear stop must face upwards so that food does not touch the rear wall and freeze to it.
Stops prevent the shelves from being pulled out accidentally.
Split shelf
In order to accomodate tall items such as tall bottles or containers in the appliance, one of the shelves is divided. The front section can be gently pushed under the rear section:
^Push the rear half of the glass shelf up slightly.
^With the rear half pushed up, lift the front half of the glass shelf slightly, then slide it carefully under the rear half.
To move the split shelf
^remove the two halves of the glass plate and
^place the two support rails left and right on the support ribs at the desired height,
^slide the glass shelves in one after the other.
The glass shelf with the limit stop must be placed at the back!
Fruit and vegetable drawers on rollers
The fruit and vegetable drawers are mounted on rollers and can be pulled out for loading and unloading. The roller plates can be removed for cleaning.
27