Installation information
Do not place any devices that produce heat (such as a toaster or microwave) on top of the appliance. This would increase the energy consumption of the appliance!
If the room is too cold, it will cause the cooling system in the appliance to switch off for too long. This may lead to higher temperatures in the appliance and the frozen food may even start thawing!
This fridge/freezer should not be placed
Because the appliance does not have heated side walls, a
Contact your dealer for advice.
Location
The appliance should not be installed directly next to a heat source (such as a kitchen range or a heater) or in direct sunlight. The higher the ambient temperature, the longer the appliance will run and the higher the energy consumption.
Choose a dry,
Climate range
The appliance is designed for use within a certain climate range (room temperature range) and should not be used outside this range. The climate range is stated on the data plate inside the appliance.
Climate range | Room temperature |
|
|
SN | +10 °C to +32 °C |
N | +16 °C to +32 °C |
ST | +16 °C to +38 °C |
T | +16 °C to +43 °C |
|
|
Proper ventilation
The air behind the appliance gets warm. In order to ensure adequate ventilation, you must make sure that the ventilation slits are not covered or blocked in any way.
Also, the ventilation slits must be dusted/cleaned on a regular basis.
Installation
^First remove any cable clips from the rear of the appliance.
^Check that all the parts on the rear of the appliance are free to move. Remove any obstructions.
^Gently slide the appliance into the desired location.
^The rear of the appliance can be directly against the wall.
46