Changing the door hinging
Mounting the top soft-close mechanism:
^Remove the cover a from the panel b, turn it 180° and replace it on the other side.
^Hook the spacer on the handle side into the retainer (A).
^Hook the
Push both parts outwards until they engage.
^With the three screws c, first screw on the spacer on the handle side and then the
^Hang the panel b on the shock absorber arm d.
^Push the cover e on from the side so
that the openings for the pin f are on top of each other.
^Pull the shock absorber arm d towards the hinge bracket and insert the pin f from the top so that the square rests in the recess.
^Then engage the cover e completely.
Take care that the cover e sits correctly to ensure that the door closes properly and the pin is secured.
57