Changing the door hinging
^Hang the panel b on the shock absorber arm d.
^Pull the shock absorber arm d towards the hinge bracket and insert the pin e from the top so that the square rests in the recess.
^Put on the cover f in such a way that it engages.
Take care that the cover f sits correctly to ensure that the door closes properly and the pin is secured.
^ Remove the securing device g. |
^Place the panel b onto the
^Close the bottom door of the appliance.
Mounting the top door of the appliance:
^Place the top door of the appliance onto the bearing pin i in in the middle of the appliance.
^Close the top door of the appliance.
^Put the hinge bracket n on the opposite side and and fasten it with the screws m.
The screw holes may have to be
^Now place the cover k on the other side.
^Align the appliance door with the appliance housing via the elongated holes in the bottom hinge bracket . Tighten the screws.
56