Changing the door hinging
^Lift the plugs l out of the door bearing bushing in the appliance door and place it on the other side.
Mounting the bottom door of the appliance:
^Remove the cover a towards the front.
^Pull the cover b off.
^Screw the adjustment foot at the bearing pin c completely in.
^With the assistance of another person, carefully tilt the appliance backwards and pull the bearing pin c down and out.
^Pay attention to the hinge bushing d.
^Loosen the screws e and remove the hinge bracket f.
^Remove the cover g and loosen the screw. Attach both to the other side.
^Screw the hinge bracket f onto the other side with the two outer screws. Do not use the middle screw; this allows later alignment of the appliance door using the outer, elongated holes!
^Unscrew the bearing part h from the hinge bracket f, turn it 180° and screw it into the opposite hole of the hinge bracket.
^Now place the cover b on the other side.
^With the assistance of another person, carefully tilt the appliance backwards and insert the bearing pin c into the hinge bracket f from below. The groove in the bottom of the hinge bracket faces forwards.
^Place the hinge bushing d onto the bearing pin c.
^Put the cover a on.
^Place the lower door of the appliance onto the bearing pin c from above.
^Close the bottom door of the appliance.
54