Changing the door hinging
^ Push the pin e up and out. |
Now the
^ Remove the panel a. |
^Push the shock absorber arm f as far as possible towards the handle side.
^Loosen the three screws g on the
^In the middle, pry out the housing with the
^Then, pry the housing with the
^Lay the
^Push out the spacer towards the hinge side.
^Lay the spacer aside.
Removing the bottom door of the appliance:
^Close the bottom door of the appliance.
^Pull the bearing pin i in the middle of the appliance up and out.
^Carefully lift and remove the bottom door of the appliance and set aside.
^Pull the cover d off.
^Unscrew the hinge bracket e, rotate it 180°, then screw it onto the opposite side.
^Turn the plastic cap h 180° and replace it on the hinge bracket k in the middle.
^Now place the cover l on the other side.
53