Timer
Whilst triangle V is flashing, use the
-or + immediately to make any changes to the setting selected:
–The + button increases the value shown.
–The - button decreases the value shown.
Triangle V will flash for approx.
5 seconds.
Settings can only be changed using the - or + buttons whilst it is flashing. If this period has elapsed, you will need to call up the required symbol again by pressing the V button.
Each press on the - or + button alters the time for the microwave programmes in
Holding the button pressed in for longer, speeds up the change in the display.
Setting the time of day
When the appliance is first
connected to the power supply, or after a power cut, "I2:00" will flash in
the display.
The time of day can only be entered if the function selector is at "0".
^Turn the function selector to "0".
lm
V
^Press the V button repeatedly until triangle V is underneath the m symbol.
^Whilst triangle V is flashing, use the
-or + button to enter the hour and confirm by pressing the V button.
The minutes and triangle V will flash.
^Now enter the minutes with the - or +
button and confirm by pressing the V button.
As soon as the m symbol goes out, the time set is saved.
23