Combination programmes
Microwave mode can be combined with either Fan plus or Grill.
Before starting a combination programme you must first select the microwave power level and the time for the process.
Microwave + Fan plus hY
^Turn the function selector to Microwave + Fan plus h Y
The display shows a suggested power level of 300 W.
W
V 
If this power level is not suitable, alter it using the - or + button.
The following power levels can be selected: 80 W, 150 W, 300 W, 450 W.
^To enter the duration press the V button or wait for approx. 5 seconds until the display changes by itself.
Wg
V
^Use the + button to enter the required duration in hours:minutes (e.g. 1 hour 30 minutes).
Wg h
V
You can enter a duration of up to a maximum of 2 hours.
With a power level of 450 W, a maximum of 60 minutes can be entered.
The h symbol will flash in the display to tell you to start the process.
^Before starting the process, use the temperature selector to choose a temperature for the Fan plus function.
The temperature selector must only be turned in a clockwise direction as far as it will go, and then back again.
Do not force it right round in a clockwise direction as this would damage the selector.
^Press the V button to start the process.
If no other symbol is selected, the cooking duration will be visible counting down in the display.
If you wait for longer than a few seconds before starting the process, the ) symbol will appear in the display and you can then set the cooking duration end time.
29