Problem solving guide
Installation work, maintenance and repairs may only be carried out by suitably qualified and competent persons in accordance with national and local safety regulations to ensure safety.
Repairs and other work by unqualified persons could be dangerous and the manufacturer will not be held liable.
Ensure current is not supplied to the appliance until after maintenance or repair work has been carried out.
Some minor problems can be corrected without contacting the Service Department.
What to do if . . . .
. . . the display does not light up
^Check whether,
–the appliance is correctly plugged in at the mains socket and switched on,
–the mains fuse has blown (call the Service Department),
–the time display had been switched off (see "Altering the time of day display and buzzer").
. . . a programme will not start
^Check whether,
–the appliance door is properly shut if operating in microwave mode,
–a power setting and time have been entered if operating in microwave mode.
.. . the microwave / heating functions but not the interior lighting
The halogen lamp is defective and needs to be replaced:
Disconnect the appliance from the electricity supply, (switch off and unplug at the socket, or remove the fuse, or switch off at the isolator as appropriate).
^Unscrew and remove the lamp cover.
^Pull the halogen lamp out.
^Fit a new halogen lamp.
Specification:
12 V, 10 W,
heat resistant to 300 °C,
fitting W271, Osram, Type 64418
^Replace the cover and screw into place.
^Reconnect the appliance to the mains supply.
51