Sears 911.41369 manual POT MFE the #OOR, When the door is remove, To Repljce, Screws

BULB

UVE

COLLAR

TO RE_OVE:

Open the door to the broil stop position. Grasp the door on each side and rift

up and off the hinges. #@

P_OT MFE THE #OOR

8Y THE HAN#LEo

BULB COVER BAIL WiRE

TO REMOVE THE CO VE_:

t. Disconnect electrical power to the oven at the main circuit breaker or fuse box.

2.Hold your hand under cover and firmly

push back the bail wire, until it clears and releases the bulb cover.

REPLACE THE LSGHT BULB:

Unscrew the light bulb and replace it with a 40-watt home appliance bulb.

T@ REPLACE COVEE_:

_n Place the bulb cover into the groove of the bulb socket,

Pull the bail wire forward until it snaps into the indentation on top of the bulb cover.

3, Reconnect the electrical power to the oven,

Do not touch a hot oven light bulb. Do not touch a bulb with

wet hands or wet cloth. Never touch the electrically five collar on the bulb when

removing or replacing the

bulb. Do not remove any

screws.

_" When the door is remove_

and the hinge arms are in the broil stop position, do not bump into the hinge arms. They could snap back and cause injury to

hands and damage the porcelain finish of the front frame. Cover the hinge arms with empty paper towel rolls or towels while working in the oven area.

TO REPLJ_CE:

Remove the paper towel rolls or towels. Make sure the hinges are still in the

broil stop position, Grasp the door on each side.

Lift the door over each

hinge, Line the slots at the bottom of the door

with the hinges. Sfide the

door down over the hinges as far as it will go.

20