GE JCT 915 Using the proofing and warming features, Instructions Operating Instructions Care

Page 19

Using the proofing and warming features.

www.geappliances.ca

The proofing feature maintains a warm environment useful for rising yeast-leavened products.

Safety

How to Set the Oven For Proofing

Place the covered dough in a dish in the oven on rack B or C.

NOTE: For best results, cover the dough with a cloth or with greased plastic wrap (the plastic may need to be anchored underneath the container so the oven fan will not blow it off).

Press the PROOF pad and then the START pad.

The display will read PrF (proof).

The oven interior light turns on and remains on during proofing.

The proofing feature automatically provides the optimum temperature for the proofing process, and therefore does not have a temperature adjustment.

Set the KITCHEN TIMER for the minimum proof time.

When proofing is finished, press the CLEAR/OFF pad.

To avoid lowering the oven temperature and lengthening proofing time, do not open the oven door unnecessarily.

Check bread products early to avoid over-proofing.

NOTE:

Do not use the proofing mode for warming food or keeping food hot. The proofing oven temperature is not hot enough to hold foods at safe temperatures. Use the WARM feature to keep food warm.

Proofing will not operate when oven is above 125°F. “HOT” will show in the display.

Instructions Operating Instructions Care

How to Set the Oven For Warming

The warm feature keeps cooked foods warm for up to 3 hours after the cooking function is finished, or it can be activated independently to keep already cooked foods warm.

This feature is not designed to reheat cold food.

To use this feature independently, press the WARM pad and then the START pad.

To activate this feature for use after Timed Baking or Roasting, press the WARM pad while programming the oven and before pressing START.

To Crisp Stale Items

Place food in low-sided dishes or pans.

For best results, place the food items in a single layer. Do not stack.

Leave them uncovered.

Check crispness after 20–30 minutes. Add time as needed.

IMPORTANT NOTES:

Food should be kept hot in its cooking container or transferred to a heat-safe serving dish.

For moist foods, cover them with an oven-safe lid or aluminum foil.

Fried or crisp foods do not need to be covered, but can become too dry if warmed for too long.

Repeated opening of the door allows the hot air to escape and the food to cool.

Allow extra time for the temperature inside the oven to stabilize after adding items.

With large loads it may be necessary to cover some of the cooked food items.

Remove serving spoons, etc., before placing containers in the oven.

Do not use plastic containers, lids or plastic wrap.

CAUTION: Plastic containers, lids or plastic wrap will melt if placed in the oven. Melted plastic may not be removable and is not covered under your warranty.

and Cleaning Troubleshooting Tips Consumer Support

19

Image 19
Contents Write the model and serial numbers here Model # Serial # 350A4502P236 229C4020P316 29-503107-02 JROperating Instructions Safety Instructions Important Safety NoticeSafety Instructions Cleaning Operating Instructions Safety InstructionsCare and Cleaning Troubleshooting Tips Consumer Support Using the oven controlsSafety Instructions Operating Instructions Fahrenheit or Celsius Temperature Selection Special features of your oven controlSafety Instructions Tips Care and CleaningConverted temperature of 325F SafetyTone Volume Using Auto Recipe ConversionHow to Exit the Sabbath Feature Using the Sabbath FeatureHow to Set for Regular Baking/Roasting Troubleshooting Tips Care and CleaningCare and Cleaning Using the ovenBroiling Guide Instructions SafetyHow to Set the Oven for Broiling InstructionsCleaning Using the clock, timer and control lockoutOperating Instructions Care How to Set an Immediate Start and Automatic Stop Using the timed baking and roasting featuresCleaning Operating Instructions Support Troubleshooting Tips CareTroubleshooting Tips Consumer Support Using the probeHow to Set the Oven For Roasting When Using the Probe Adapting Recipes… Using the convection ovenConvection Fan Multi-Rack Convection BakingConvection Roast How to Set the Oven for Convection Baking or RoastingInstructions Operating Instructions Tips Consumer SupportCare and Cleaning Operating Instructions Using the timed features for convection cookingInstructions Operating Instructions Care and Cleaning Press the Convection Roast pad Convection Roasting GuideInstructions Operating Instructions Care Using the proofing and warming featuresHow to Set the Oven For Proofing How to Set the Oven For WarmingType of margarine will affect baking performance Adjust the oven thermostat-Do it yourselfCleaning Operating Instructions To Adjust the ThermostatOven must be cool in order to set the self-clean cycle Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningAfter a Clean Cycle Cleaning Operating Instructions SafetyHow to Delay the Start of Cleaning To remove Care and cleaning of the ovenHow to Remove Packaging Tape Oven Light BulbsLift-Off Oven Door Operating Instructions SafetyTroubleshooting Tips Care and Cleaning Cleaning the Oven DoorOven Heating Elements Care and CleaningProbe Oven Racks and Convection Roasting RackStainless Steel Surfaces on some models Control PanelProblem Possible Causes What To Do Before You Call For Service…When you want See the Using the self-cleaning oven sectionDuring clean cycle Not open after a Clean cycleOr letter flash See the Special features of your oven control sectionPower outage A numberTroubleshooting Tips One Year Camco Built-In Electric Oven WarrantyWhat is Not Covered We Will ReplaceContact Us Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Extended Warranties

JCT 915, JCK 915 specifications

The GE JCK 915 and JCT 915 are advanced electric locomotives that exemplify modern engineering and operational efficiency. These models are specifically designed to meet the demands of contemporary rail transport, offering reliability, performance, and reduced environmental impact.

One of the main features of the JCK 915 and JCT 915 locomotives is their powerful traction system. These models are equipped with high-efficiency traction motors that provide excellent acceleration and speed capabilities. This is particularly beneficial for freight services where the movement of heavy loads over long distances is required. The locomotives can operate effectively on various rail gauges, making them versatile for different rail networks.

The locomotives utilize cutting-edge technologies, including advanced diagnostic systems. These systems monitor the health and performance of critical components in real-time, allowing for proactive maintenance and reducing downtime. The integration of onboard data analytics ensures that operators can make informed decisions based on performance metrics, leading to increased efficiency and longevity of the locomotive.

The aerodynamic design of the JCK 915 and JCT 915 also contributes to their operational efficiency. With reduced drag coefficients, these locomotives can achieve higher speeds while consuming less energy. This design consideration aligns with the industry's growing emphasis on sustainability and lowering greenhouse gas emissions.

Safety is a top priority in the design of these locomotives. They come equipped with modern safety features, including advanced braking systems and collision avoidance technologies. The cab design provides improved visibility for the operators, enhancing overall safety during operations.

In terms of comfort, the cab area of the JCK 915 and JCT 915 is designed with the operator in mind. Ergonomic seating, modern controls, and climate control systems create a comfortable working environment, which can significantly enhance operational efficiency.

Moreover, both models are equipped with regenerative braking capabilities. This feature allows the locomotives to recover energy during braking, which can be reintegrated into the system, improving overall energy efficiency.

In summary, the GE JCK 915 and JCT 915 locomotives showcase a blend of power, efficiency, modern safety, and operator comfort. With their advanced features and technologies, they are well-suited to meet the evolving challenges of the rail industry, paving the way for a more efficient and sustainable future in transportation.