GE JCT 915, JCK 915 Care and cleaning of the oven, How to Remove Packaging Tape, Oven Light Bulbs

Page 23

Care and cleaning of the oven.

www.geappliances.ca

Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.

How to Remove Packaging Tape

To assure no damage is done to the finish

Apply with a soft cloth and allow to soak.

of the product, the safest way to remove

Wipe dry and then apply an appliance

the adhesive left from packaging tape

polish to thoroughly clean and protect

on new appliances is an application

the surface.

of a household liquid dishwashing

NOTE: The plastic tape must be removed from all

detergent, mineral oil or cooking oil.

chrome trim. It cannot be removed if it is baked on.

Safety Instructions Operating

ReceptacleSocket

Bulb

Tab

Glass cover

Oven Light Bulbs

NOTE: The glass cover should be removed only when cold. Wearing latex gloves may offer a better grip.

CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the oven at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

For your safety, do not touch a hot bulb with bare hands or a damp cloth.

To remove:

Turn the glass cover counterclockwise 1/4 turn until the tabs of the glass cover clear the grooves of the socket.

Using gloves or a dry cloth, remove the bulb by pulling it straight out.

To replace:

Use a new 130-volt halogen bulb, not to exceed 50 watts.

Using gloves or a dry cloth, remove the bulb from its packaging. Do not touch the bulb with bare fingers.

Receptacle

Use gloves or cloth

Push the bulb straight into the receptacle all the way.

Place the tabs of the glass cover into the grooves of the socket. Turn the glass cover clockwise 1/4 turn.

For improved lighting inside the oven, clean the glass cover frequently using a wet cloth. This should be done when the oven is completely cool.

Reconnect electrical power to the oven.

Instructions Care and Cleaning Troubleshooting Tips Consumer Support

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Write the model and serial numbers here Model # Serial # 350A4502P236 229C4020P316 29-503107-02 JROperating Instructions Safety Instructions Important Safety NoticeSafety Instructions Cleaning Operating Instructions Safety InstructionsSafety Instructions Operating Instructions Using the oven controlsCare and Cleaning Troubleshooting Tips Consumer Support Fahrenheit or Celsius Temperature Selection Special features of your oven controlSafety Instructions Tips Care and CleaningConverted temperature of 325F SafetyTone Volume Using Auto Recipe ConversionHow to Exit the Sabbath Feature Using the Sabbath FeatureHow to Set for Regular Baking/Roasting Troubleshooting Tips Care and CleaningCare and Cleaning Using the ovenBroiling Guide Instructions SafetyHow to Set the Oven for Broiling InstructionsOperating Instructions Care Using the clock, timer and control lockoutCleaning How to Set an Immediate Start and Automatic Stop Using the timed baking and roasting featuresCleaning Operating Instructions Support Troubleshooting Tips CareHow to Set the Oven For Roasting When Using the Probe Using the probeTroubleshooting Tips Consumer Support Adapting Recipes… Using the convection ovenConvection Fan Multi-Rack Convection BakingConvection Roast How to Set the Oven for Convection Baking or RoastingInstructions Operating Instructions Tips Consumer SupportCare and Cleaning Operating Instructions Using the timed features for convection cookingInstructions Operating Instructions Care and Cleaning Press the Convection Roast pad Convection Roasting GuideInstructions Operating Instructions Care Using the proofing and warming featuresHow to Set the Oven For Proofing How to Set the Oven For WarmingType of margarine will affect baking performance Adjust the oven thermostat-Do it yourselfCleaning Operating Instructions To Adjust the ThermostatOven must be cool in order to set the self-clean cycle Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningHow to Delay the Start of Cleaning Cleaning Operating Instructions SafetyAfter a Clean Cycle To remove Care and cleaning of the ovenHow to Remove Packaging Tape Oven Light BulbsLift-Off Oven Door Operating Instructions SafetyTroubleshooting Tips Care and Cleaning Cleaning the Oven DoorOven Heating Elements Care and CleaningProbe Oven Racks and Convection Roasting RackStainless Steel Surfaces on some models Control PanelProblem Possible Causes What To Do Before You Call For Service…When you want See the Using the self-cleaning oven sectionDuring clean cycle Not open after a Clean cycleOr letter flash See the Special features of your oven control sectionPower outage A numberTroubleshooting Tips One Year Camco Built-In Electric Oven WarrantyWhat is Not Covered We Will ReplaceContact Us Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Extended Warranties

JCT 915, JCK 915 specifications

The GE JCK 915 and JCT 915 are advanced electric locomotives that exemplify modern engineering and operational efficiency. These models are specifically designed to meet the demands of contemporary rail transport, offering reliability, performance, and reduced environmental impact.

One of the main features of the JCK 915 and JCT 915 locomotives is their powerful traction system. These models are equipped with high-efficiency traction motors that provide excellent acceleration and speed capabilities. This is particularly beneficial for freight services where the movement of heavy loads over long distances is required. The locomotives can operate effectively on various rail gauges, making them versatile for different rail networks.

The locomotives utilize cutting-edge technologies, including advanced diagnostic systems. These systems monitor the health and performance of critical components in real-time, allowing for proactive maintenance and reducing downtime. The integration of onboard data analytics ensures that operators can make informed decisions based on performance metrics, leading to increased efficiency and longevity of the locomotive.

The aerodynamic design of the JCK 915 and JCT 915 also contributes to their operational efficiency. With reduced drag coefficients, these locomotives can achieve higher speeds while consuming less energy. This design consideration aligns with the industry's growing emphasis on sustainability and lowering greenhouse gas emissions.

Safety is a top priority in the design of these locomotives. They come equipped with modern safety features, including advanced braking systems and collision avoidance technologies. The cab design provides improved visibility for the operators, enhancing overall safety during operations.

In terms of comfort, the cab area of the JCK 915 and JCT 915 is designed with the operator in mind. Ergonomic seating, modern controls, and climate control systems create a comfortable working environment, which can significantly enhance operational efficiency.

Moreover, both models are equipped with regenerative braking capabilities. This feature allows the locomotives to recover energy during braking, which can be reintegrated into the system, improving overall energy efficiency.

In summary, the GE JCK 915 and JCT 915 locomotives showcase a blend of power, efficiency, modern safety, and operator comfort. With their advanced features and technologies, they are well-suited to meet the evolving challenges of the rail industry, paving the way for a more efficient and sustainable future in transportation.
Top Page Image Contents