GE JCT 915, JCK 915 owner manual Safety Instructions

Page 3

www.geappliances.ca

WARNING!

SAFETY PRECAUTIONS

Safety Instructions

Do not store flammable materials in an oven.

CAUTION: Items of interest to children should not be stored in cabinets above an oven; children climbing on the oven to reach items could be seriously injured.

Never wear loose-fitting or hanging garments while using the appliance. Be careful when reaching for items stored in cabinets over the oven. Flammable material could be ignited if brought in contact with hot surfaces or heating elements and may cause severe burns.

Use only dry pot holders—moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch hot heating elements. Do not use a towel or other bulky cloth.

For your safety, never use your appliance for warming or heating the room.

Do not let cooking grease or other flammable materials accumulate in or near the oven.

Do not use water on grease fires. Never pick up a flaming pan. Turn the controls off.

Flame in the oven can be smothered completely by closing the oven door and turning the oven off or by using a multi- purpose dry chemical or foam-type fire extinguisher.

Do not touch the heating elements or the interior surface of the oven. These surfaces may be hot enough to burn even though they are dark in color. During and after use, do not touch, or let clothing or other flammable materials contact any interior area of the oven; allow sufficient time for cooling first.

Potentially hot surfaces include oven vent openings, surfaces near the openings, crevices around the oven door, the edges of the window and metal trim parts above the door.

REMEMBER: The inside surface of the oven may be hot when the door is opened.

Never leave jars or cans of fat drippings in or near your oven.

Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Stand away from the oven when opening the oven door. Hot air or steam which escapes can cause burns to hands, face and/or eyes.

Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury.

Keep the oven vent unobstructed.

Keep the oven free from grease buildup.

Place the oven shelf in the desired position while the oven is cool. If shelves must be handled when hot, do not let pot holder contact the heating elements.

When using cooking or roasting bags in the oven, follow the manufacturer’s directions.

Pulling out the shelf to the stop-lock is a convenience in lifting heavy foods. It is also a precaution against burns from touching hot surfaces of the door or oven walls.

Do not use the oven to dry newspapers. If overheated, they can catch on fire.

Do not use the oven for a storage area. Items stored in an oven can ignite.

Do not leave paper products, cooking utensils or food in the oven when not in use.

After broiling, always take the broiler pan out of the oven and clean it. Leftover grease in the broiler pan can catch fire next time you use the pan.

Clean only parts listed in this Owner’s Manual.

Do not use aluminum foil to line oven bottoms, except as suggested in this manual. Improper installation of aluminum foil may result in a risk of electric shock or fire.

3

Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support

Image 3
Contents Write the model and serial numbers here Model # Serial # 350A4502P236 229C4020P316 29-503107-02 JROperating Instructions Safety Instructions Important Safety NoticeSafety Instructions Cleaning Operating Instructions Safety InstructionsUsing the oven controls Care and Cleaning Troubleshooting Tips Consumer SupportSafety Instructions Operating Instructions Fahrenheit or Celsius Temperature Selection Special features of your oven controlSafety Instructions Tips Care and CleaningConverted temperature of 325F SafetyTone Volume Using Auto Recipe ConversionHow to Exit the Sabbath Feature Using the Sabbath FeatureHow to Set for Regular Baking/Roasting Troubleshooting Tips Care and CleaningCare and Cleaning Using the ovenBroiling Guide Instructions SafetyHow to Set the Oven for Broiling InstructionsUsing the clock, timer and control lockout CleaningOperating Instructions Care How to Set an Immediate Start and Automatic Stop Using the timed baking and roasting featuresCleaning Operating Instructions Support Troubleshooting Tips CareUsing the probe Troubleshooting Tips Consumer SupportHow to Set the Oven For Roasting When Using the Probe Adapting Recipes… Using the convection ovenConvection Fan Multi-Rack Convection BakingConvection Roast How to Set the Oven for Convection Baking or RoastingInstructions Operating Instructions Tips Consumer SupportCare and Cleaning Operating Instructions Using the timed features for convection cookingInstructions Operating Instructions Care and Cleaning Press the Convection Roast pad Convection Roasting GuideInstructions Operating Instructions Care Using the proofing and warming featuresHow to Set the Oven For Proofing How to Set the Oven For WarmingType of margarine will affect baking performance Adjust the oven thermostat-Do it yourselfCleaning Operating Instructions To Adjust the ThermostatOven must be cool in order to set the self-clean cycle Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningCleaning Operating Instructions Safety After a Clean CycleHow to Delay the Start of Cleaning To remove Care and cleaning of the ovenHow to Remove Packaging Tape Oven Light BulbsLift-Off Oven Door Operating Instructions SafetyTroubleshooting Tips Care and Cleaning Cleaning the Oven DoorOven Heating Elements Care and CleaningProbe Oven Racks and Convection Roasting RackStainless Steel Surfaces on some models Control PanelProblem Possible Causes What To Do Before You Call For Service…When you want See the Using the self-cleaning oven sectionDuring clean cycle Not open after a Clean cycleOr letter flash See the Special features of your oven control sectionPower outage A numberTroubleshooting Tips One Year Camco Built-In Electric Oven WarrantyWhat is Not Covered We Will ReplaceContact Us Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Extended Warranties

JCT 915, JCK 915 specifications

The GE JCK 915 and JCT 915 are advanced electric locomotives that exemplify modern engineering and operational efficiency. These models are specifically designed to meet the demands of contemporary rail transport, offering reliability, performance, and reduced environmental impact.

One of the main features of the JCK 915 and JCT 915 locomotives is their powerful traction system. These models are equipped with high-efficiency traction motors that provide excellent acceleration and speed capabilities. This is particularly beneficial for freight services where the movement of heavy loads over long distances is required. The locomotives can operate effectively on various rail gauges, making them versatile for different rail networks.

The locomotives utilize cutting-edge technologies, including advanced diagnostic systems. These systems monitor the health and performance of critical components in real-time, allowing for proactive maintenance and reducing downtime. The integration of onboard data analytics ensures that operators can make informed decisions based on performance metrics, leading to increased efficiency and longevity of the locomotive.

The aerodynamic design of the JCK 915 and JCT 915 also contributes to their operational efficiency. With reduced drag coefficients, these locomotives can achieve higher speeds while consuming less energy. This design consideration aligns with the industry's growing emphasis on sustainability and lowering greenhouse gas emissions.

Safety is a top priority in the design of these locomotives. They come equipped with modern safety features, including advanced braking systems and collision avoidance technologies. The cab design provides improved visibility for the operators, enhancing overall safety during operations.

In terms of comfort, the cab area of the JCK 915 and JCT 915 is designed with the operator in mind. Ergonomic seating, modern controls, and climate control systems create a comfortable working environment, which can significantly enhance operational efficiency.

Moreover, both models are equipped with regenerative braking capabilities. This feature allows the locomotives to recover energy during braking, which can be reintegrated into the system, improving overall energy efficiency.

In summary, the GE JCK 915 and JCT 915 locomotives showcase a blend of power, efficiency, modern safety, and operator comfort. With their advanced features and technologies, they are well-suited to meet the evolving challenges of the rail industry, paving the way for a more efficient and sustainable future in transportation.